Determining Correct Trailer Hitch Receiver For 2019 Chevrolet Silverado 1500

Question

Question:

2019 chevy silverado c1500 LT I dont know which version to use on the menu 1500 or 1500LD on your site. Please tell me the part numbers to order for the truck curt 2 in ball hitch. no factory hitch but factory wiring is there. Thanks

asked by: Anthony

0

Expert Reply:

The difference between 1500LD and the standard 1500 is the LD is the 2018 body style, where the standard 1500 is the new body style.

If your truck is the older 2018 body style then you will need the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C13175 which has a 600lb tongue weight rating and 6000lbs trailer weight rating or 1000lb tongue weight rating and 10000lb trailer weight rating if using a weight distribution hitch.

Now if your truck is the new body style you will need the Curt Trailer Hitch Receiver # C13393 instead which has the same 600lb/6000lb or 1000lb/10000lb ratings.

To complete your towing setup you will just need a hitch ball, ball mount, and hitch pin and clip. If you do not already have these I recommend the etrailer Ball Mount Kit # 989900 which includes all of these components.

I included videos of the products mentioned for you to take a look at.

expert reply by: Samuel C

0

Answer 1

The Curt Trailer Hitch Receiver part #C13393 is just what you need to install a trailer hitch on a 2020 Chevrolet Silverado 1500 without factory trailer hitch. The setup you have now is just a cross member which is used to provide support when towing…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 7

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 8

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...

Answer 9

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 10

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Answer 11

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Determining Correct Trailer Hitch Receiver For 2019 Chevrolet Silverado 1500

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching