Which Size Wheels Fit The 7" Hub and Drum Assembly AKHD-545-2-2K?
Question:
I have these wheels: AM30100 Ive tried to fit them on Dexter hub K08-257-91 and they dont fit. Will these hubs work?
asked by: Stephen T
Helpful Expert Reply:
I have a replacement wheel and tire option for you, but none of the 7" hub and drum assemblies including the # 8-257-5UC3 and # AKHD-545-2-2K require a minimum wheel size of 10".
So you can keep using your # 8-257-5UC3, but you will need to replace the Kenda 5.70-8 Bias Trailer Tire with 8" White Wheel - 5 on 4-1/2 - Load Range B # AM30100 with a 10" wheel # AM20046, tire # AM1HP52, and valve stems # AM20903.
Keep in mind these tires will be 2.5" wider and 2.4" taller than your current tire so you will need to make sure you have enough clearance to run this larger tires.
I included videos of the products mentioned for you to take a look at.
Products Referenced in This Question
Dexter Trailer Hub and Drum Assembly for 2,000-lb Axles - 7" - 5 on 4-1/2
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Standard
- L44649
- L44649
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 12 Inch Wheel
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Loadstar K399 Bias Trailer Tire - 205/65-10 - Load Range C
- Trailer Tires and Wheels
- Tire Only
- Bias Ply Tire
- Load Range C
- 205/65-10
- 10 Inch
- M - 81 mph
- Kenda
more information >
Steel Trailer Wheel - 10" x 6" Rim - 5 on 4-1/2 - White
- Trailer Tires and Wheels
- Wheel Only
- 10 Inch
- 5 on 4-1/2 Inch
- Steel Wheels - Powder Coat
- Americana
more information >
Americana Rubber, Snap-In Valve Stem - 1-1/4" Long - Up to 65 psi
- Tire Repair Tools
- Valve Stems
- Snap-In Stem
- 8 Inch Tire
- 10 Inch Tire
- 12 Inch Tire
- 13 Inch Tire
- 14 Inch Tire
- 15 Inch Tire
- Rubber
- 65 psi
- Black
- Americana
more information >
Kenda 5.70-8 Bias Trailer Tire with 8" White Wheel - 5 on 4-1/2 - Load Range B
- Trailer Tires and Wheels
- Tire with Wheel
- Bias Ply Tire
- Load Range B
- 5.70-8
- 8 Inch
- 5 on 4-1/2 Inch
- Steel Wheels - Powder Coat
- Kenda
more information >
Product Page this Question was Asked From
Trailer Hub and Drum Assembly - 2K Axles - 7" Diameter - 5 on 4-1/2 - L44649 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Pre-Greased
- Standard
- L44649
- L44649
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- etrailer
more information >
Continue Researching
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Trailer Wiring Diagrams
- Q&A: Dimension Of Brake Mounting Flange For 7 Inch Electric Or Hydraulic Brakes
- Article: Most Popular Wheel Bearings
- Article: Trailer Tire Sizing
- Q&A: What is Difference Between Trailer Bearings L44649 vs L44643
- Article: Gooseneck to 5th Wheel Adapters
- Q&A: 2,200 lb Axle Replacement System for Triton Snowmobile Trialer
- Q&A: How to Verify a Hub Fitment on a Spindle
- Q&A: Replacement Brake Assemblies for 2,200 lb Reliable Trailer Axles
- Q&A: Parts Needed to Add Brakes 2,000 lb Trailer Axle with 5 on 4-1/2 inch Bolt Pattern
- Q&A: Highest Capacity 13 inch Trailer Tire Recommendation
- Article: Best Tire Chains
- Article: The 5 Best Trailer Drop Hitches You Can Buy