Replacement Keys For Rhino Rack

Question

Question:

I purchased a Rhino roof rack system 2003 Ford Excursion from you 3 or so years ago. Im in need of replacement keys, the lock number is 012 and the rack end cap is code M622 original keyinch was a blue plastic round key. Can I get those from you? If so I havent seen either of the numbers/codes on your site.

asked by: Tim N

0

Expert Reply:

If you need replacement keys the part you need is the Rhino-Rack Masterkey Lock Barrels - Keyed Alike - Qty 2, part # RRRK***-2, with the key number inserted. Your lock core is 012 you need part # RRRK012-2. Unfortunately, you have to get the entire kit, including the lock barrels, to get the key.

expert reply by: Mark Smith

0

Answer 1

For Rhino-Rack accessories you'll need to replace the entire lock core for new keys. For example, you'd need the Rhino-Rack Masterkey Lock Barrels #RRRK062-2 for key number 062 or Rhino-Rack Masterkey Lock Barrels #RRRK118-2 for key 118. I…

view full answer...

Answer 2

Thanks for the photo, and what it seems to me when I zoomed in on the image was that your lock core read "012". I recommend taking a little closer look to verify this, but if it does say "012" you can get a new key, and new cores…

view full answer...

Answer 3

For your setup I recommend the TrackTowers for Yakima Crossbars and Platforms - Track Mount #Y52AV which includes everything you need to mount Yakima crossbars to your Retrax cover (unless you plan on using the Round or HD bars - then you'll need…

view full answer...

Answer 4

For lock cores to use with the Replacement Cable Lock Assembly for Yakima HoldUp Bike Carriers #Y8890284 you just need the following: - Yakima Same Key System (SKS) Lock Cores (QTY 2) #Y07202 This comes with lock cores (they aren't sold in…

view full answer...

Answer 5

According to Yakima you'd unlock the twist plugs by using a coin to rotate them counter clockwise and from there you'd be able to pull them out to install the SKS kit part #Y07204.

view full answer...

Answer 6

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 7

If the frame on your RV on a 2019 Ford E350 chassis is between 47" and 71" wide, you can use the Multi-Fit Motor Home Trailer Hitch #82201 to replace the existing hitch. This is an adjustable hitch designed to sit between the frame members…

view full answer...

Answer 8

You will need to look at the face of the lock on your RocketBox. There will be a number like A149. With that number I can tell you the correct replacement key. The control key, #Y8007835, is used to install or remove locks and will only work to do…

view full answer...

Answer 9

The Yakima BedRock HD Bars #Y01160-59 you referenced have a 300-lbs total capacity, not per bar; additionally it should be noted that when used for off road applications you'll be limited to 180-lbs total. The good thing about most crossbar…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Replacement Keys For Rhino Rack

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching