Will Rhino Rack Pioneer Platform Tray Fit 2019 Toyota Highlander

Question

Question:

Would this size be a good fit for a Toyota Highlander 2019? The factory crossbars are only 38 across the middle until you get the plastic bracket on the side. It is not as wide as the bars that go straight across on the top of the brackets. 48x38

asked by: Bill

0

Expert Reply:

Yes the Rhino Rack Pioneer Platform Tray part # RR42114BF that you referenced does fit the factory crossbars of your 2019 Toyota Highlander and would be a great option.

expert reply by: Jameson C

0

Answer 1

The 49" length of the Thule Canyon XT #TH859XT is measured as the overall length of the cargo basket. The front edge of the basket where the fairing sits does tilt inward and limit what you can put in that space, but not as much as you'd…

view full answer...

Answer 2

Yes the Rhino Rack Universal Pioneer Platform Rack #RR42114BF that you referenced does fit the factory crossbars of your 2019 Toyota RAV4 without the use of any additional adapters and also does not require any drilling.

view full answer...

Answer 3

Yakima has the LoadWarrior Roof Rack cargo Basket #Y07070 that I recommend for your 2008 Toyota 4 Runner. The Yakima rack is constructed of strong steel for durability and weighs just 25 lbs. The Yakima LoadWarrior cargo basket will work with a…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 7

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Answer 8

Thanks for all the details! We definitely have a way to get a cargo basket and an awning installed on your 2024 Toyota Highlander, although the aftermarket roof rack systems will use a clamping system with your door jambs instead of mounting via…

view full answer...

Answer 9

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 12

Yakima's Skyline towers part #Y53TR can fit the tracks of the Retrax XR that you have with the landing pad 1 part #Y00221 but there isn't a way with the Baseline towers. Your Yakima Corebar or Jetstream bars will work with the Skyline towers…

view full answer...

Will Rhino Rack Pioneer Platform Tray Fit 2019 Toyota Highlander

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching