Recommended Electric Trailer Jack Replacement for Jayco Eagle Pop Up Camper

Question

Question:

I have a 2001 Jayco Eagle Pop Up tent camper and was wondering what electric Jack would be best for this trailer?

asked by: Dillon T

0

Expert Reply:

The Electric Jack w/ Footplate part # EJ-3520-BBX is my recommendation for an electric trailer jack replacement for a Jayco Eagle Pop Up Camper. It will be a direct bolt-on swap. It has a 3,500 lb capacity which will be more than enough. It has a light for use at night and comes with a manual crank handle in the event of a power loss.

expert reply by: Conner L

0

Answer 1

Yes, I went out to our warehouse for you and can confirm that the Ram Removable, 6" Poly Caster Assembly part #JC-101 will fit the Electric Jack w/ Footplate part #EJ-3520-BBX. Please note that using this wheel on your jack will reduce its…

view full answer...

Answer 2

Hi Tom, I have two options to replace the electric tongue jack on your Jayco Whitehawk: Option 1: Electric Jack w/ Footplate #EJ-3520-BBX. This jack is going to be your no-frills 'get the job done' style jack. It has a 3,500lb capacity and…

view full answer...

Answer 3

I went ahead and pulled this Replacement I-Beam Jack Bracket #LC349975 from our warehouse to measure. I have attached the dimensions below. Hope this Helps.

view full answer...

Answer 4

For your electric jack, there are only three possible explanations for your jack not working with a charged battery. Either power is not getting to your motor, your motor is bad, or your ground connection isn't working properly. To test power,…

view full answer...

Answer 5

Since the Ultra-Fab Electric A-Frame Jack #UF97FR has a triangular bolt pattern it would rotate the jack 120 degrees and may or may not work for your application. There are other jacks which have multiple mounting patterns on the flange like the…

view full answer...

Answer 6

The bearing kit you need for your trailer is part #BK1-100. This will include L44643 inner and outer bearings, and the seal with a 1.249 inside diameter. The kit also includes the races and a cotter pin. If you are replacing both sides of the trailer…

view full answer...

Answer 7

This is a pretty common issue with aluminum frames so we definitely have a options available for you. With that being said, the 8 inch frame height will make things a bit more difficult, but not impossible. First, the Curt TruTrack Weight…

view full answer...

Answer 8

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Recommended Electric Trailer Jack Replacement for Jayco Eagle Pop Up Camper

Product Page this Question was Asked From

Continue Researching