B&W Custom Installation Kit w/ Base Rails and PullRite 5th Wheel Trailer Hitches

Question

Question:

Can this custom install kit be used to mount a Pullrite 2700 hitch in my 2005 F-250 with 6.75” bed?

asked by: Steve S

0

Expert Reply:

The B&W Custom Installation Kit w/ Base Rails for 5th Wheel Trailer Hitches, # BWRVK2400 is a confirmed fit for the 2005 Ford F-250 and F-350 Super Duty with a 6-3/4 Foot Bed. This installation kit lets you mount your 5th-wheel trailer hitch in the bed of your truck providing Industry Standard Rails. Information that is available to me, Pullrite builds a 2700 ISR Series 16K SuperGlide Hitch. If the 2700 model that you reference matches this, or does match ISR specs then yes, the # BWRVK2400 will be what you need.

expert reply by: Michael R

0

Answer 1

Your B&W #BWRVK3270 5th-Wheel hitch has a footprint measuring, 31-3/4" wide x 33-1/2" deep. You could use the Reese #RP30055 hitch cover that only covers the head of the hitch, or the Classic Accessories #CA80116 hitch cover that…

view full answer...

Answer 2

It is impossible to accurately guess what rails they had installed at this point. Yes, the Reese Universal Base Rails and Installation Kit, #RP30035, that you linked to will fit your 2005 Ford F-350 Super Duty with 8 foot bed and it may even match…

view full answer...

Answer 3

I would start by using a circuit tester, item #PTW2993, to check the center trailer connection on the truck. If you have constant 12-volt power on this circuit, then you are correct that it could be used to charge the battery on your trailers and the…

view full answer...

Answer 4

I looked up the trailer connector wiring diagram for a 2007 Ford F-250 which should be the same as a Ford F-350 and found the 7-way trailer connector to contain the following wires: Orange = 12 Volt Power White = Ground Black/Green = Reverse Blue =…

view full answer...

Answer 5

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

The head alone for the B&W Companion hitch #BWRVK3500 weighs about 70 pounds. Everything else weighs about 130 pounds. So the total weight of the hitch is approximately 200 pounds.

view full answer...

Answer 11

Most fifth wheel rails are made to the same industry standard dimensions. They aren't all though. If you measure 22 inches on center between the two rails and they look like the rails of the #RP30035 that you referenced they would be the industry…

view full answer...

Answer 12

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

B&W Custom Installation Kit w/ Base Rails and PullRite 5th Wheel Trailer Hitches

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching