Which Rhino Rack Gutter Foot Fits 2021 Jeep Wrangler Unlimited

Question

Question:

Hi there, What is the difference in the RL150S5 and RL150S10....there is also and S1, S2, S13 and a RL150 without the S ending? The Rhino website says the RL150S5 would fit my jeep but will the S10 or other gutter mounts fit also. The pictures all the exact same for each product. Thanks much for your help.

asked by: Karl L

0

Expert Reply:

The difference between the two part numbers is the slight difference on the fit kit portion of the feet and what vehicle's gutters they are designed to fit. For your 2021 Jeep Wrangler Unlimited the gutter foot that is recommended is the part # RRRL110S5-3 with the rest of the components being part numbers # RRVA150B-3, # RRVA-FK1-3, and # LHS-A1PAIR.

expert reply by: Jameson C

0

Answer 1

To use the Rhino-Rack Backbone part #RRRJLB1 with 3 Vortex Crossbars on the 2018 Jeep JL Wrangler you will need part #RRRLT600H with part #RRRLT600, 3 sets of spacers part #RRQMVA05, part #RRQMFK05 for the rubber bases and part #RRVA150B-3 for the…

view full answer...

Answer 2

The Rhino-Rack Heavy-Duty Roof Rack Roof Rack have specific C-channels that are designed to fit specific Rhino-Rack Heavy-Duty accessories, like the Rhino-Rack Hi-Lift Jack and Shovel-Holder Brackets #RRRCB-RSHB-RJHB as an example. That's the…

view full answer...

Answer 3

For your 2017 Jeep Wrangler Unlimited with a hard top the three crossbar Rhino Rack roof rack part numbers #RRVA150B-3, #RRRLT600-3, #RRRJKB1, #RRQMFK05, and #RRQMVA05 would be an excellent option with more than enough weight capacity for the tent…

view full answer...

Answer 4

For a heavy duty roof rack system for your 2022 Jeep Wrangler Sahara Unlimited I recommend the following parts: Rhino-Rack Heavy-Duty Roof Rack Crossbars - Black - 59" Long - Qty 3 #RB1500B-3 RCL Legs for Rhino-Rack Crossbars and Pioneer…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Answer 7

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

You will need the Pollak 6-Pole #PK12720 to replace the end on the Hopkins Custom Tail Light Wiring Kit #HM56200. You will cut off the 4-way end and connect the wires inside the 6-pin connector. We do have a Mounting Bracket #PK11771 which will make…

view full answer...

Answer 10

What you need is a light kit specifically for flat-towing. The Plug-N-Tow TM Vehicle Wiring Harness, #42615, would be if the Jeep were towing a trailer and not for activating its lights while it is being towed. There are a few options for lighting…

view full answer...