Roadmaster MX Base Plate Kit Installation - 2015 Jeep Wrangler Unlimited Video

For a 2017 Jeep Wrangler Rubicon Hard Rock Edition the Roadmaster base plate kit you can use is part #1444-3 which will fit your Hard Rock so long as you do NOT have the American Expedition Vehicles bumper. The linked video shows installation of this…

The Roadmaster EZ5 Base Plates #RM-521448-5 will not fit the Jeep Wrangler Unlimited 75th Anniversay Edition. For base plates that will you can use the Roadmaster XL #1444-1 or Roadmaster MX #1444-3. I've attached videos with both kits…

The Roadmaster application guide shows two base plate kits as fits for your 2013 Jeep Wrangler Unlimited 10th Anniversary Edition Rubicon, the MX series, part #1444-3, and the XL series, part #1444-1. Our product page for the #1444-3 incorrectly…

We sure do! The correct replacement slide out motor for your Power Gear 1510000042 is part #LC88UD on our site.

The two Roadmaster base plates we offer for the 2015 Jeep Wrangler Unlimited, parts #RM-521448-4 and #RM-521448-5, are not compatible with the 10th Anniversary Rubicon but we do offer a base plate kit from Blue Ox that will fit the Rubicon Hard rock…

You could try just trimming a section of the air dam out for the bracket to go through, but most likely you would find that it's lack of support would cause it to be rather flimsy and it would make tightening the bolts on the outside of the base…

Looking at the installation instructions for base plates #RM-521448-5 you will need to remove the air damn, trim it according to the instructions, and then reinstall it. Trimming is needed for proper installation of the base plates.

I checked the install instructions for the Roadmaster base plate kit #RM-521448-4 which is a fit for your 2017 Jeep Wrangler Unlimited and like you said the only permanent modifications needed is the trimming of the rock guard like in the picture I…

If you have a base plate kit set up on your 2008 Jeep Wrangler you most likely have a flat towing setup already and just need a new base plate kit for the 2014 Wrangler Unlimited. For that you would need the part #RM-521448-4 which is a confirmed…

If you are looking for a protective screen or guard for a vehicle being flat towed behind a motorhome we do have such products. Both types of products are displays on the two linked pages. These include products like the Roadmaster Guardian #RM-4000…

Even with the rear axle of your motorhome being a decent distance from the rear of it there will still be rocks and other debris that will fly up from the wheels and potentially hit your vehicle. The Rock Guard part #RM-4000 will definitely help.…

The Heavy Duty Magnetic Tow Lights - 20' Wiring Harness with 4-Way Flat Trailer Connector #TL21RK can be connected to your Jeep at the back for a standard trailer connection. You can splice the 4-way into your vehicle wiring like you mentioned,…