TorkLift Camper Tie-Down Compatibility With A 2002 Ford F-250

Question

Question:

Will the TorkLift F3006 fit my 02 f250?

asked by: Tom R

0

Expert Reply:

Yes, the TorkLift Custom Frame-Mounted Camper Tie-Downs - Rear Item # TLF3006 are custom designed to fit Ford F-250's and F-350 Super Duty's.

If you need turnbuckles I recommend the TorkLift Locking FastGun Turnbuckles for Frame-Mounted Tie-Downs - Stainless Steel - Black - Qty 4 Item # TLS9529-2-LK.

expert reply by: Kevin C

0

Answer 1

You're absolutely correct. For a 1999 Ford F350 SRW without the factory sway bar, you'd use #RM-1139-153 along with the #RM-590230-00 end link kit.

view full answer...

Answer 2

I attached a couple pictures that I took from the install instructions for the Torklift Tie Down part #TLF2012 that you have that shows how all of the brackets bolt together. Hopefully that answers your question about how the plates all bolt…

view full answer...

Answer 3

If only we did! We do have similar options to secure your camper. If you don't have a board or step underneath your truck you could get something like the Brophy Clamp On Camper Tie-Downs #HSWB. This is a bed mounted tie down but if you wanted…

view full answer...

Answer 4

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 5

It sounds like the purpose of getting the air helper spring would be to counteract the 1 inch compression you're getting in your rear suspension caused by the pin weight of your 5th wheel. If that's the case, I believe that the AirLift 5000…

view full answer...

Answer 6

We have run into this quite a few times in the past, and the best option will be replacing the Lance 7-pin connector with a standard 7-way blade connector like the #PK12706. This will give you a standard 7-way connector to plug into the factory 7-way…

view full answer...

Answer 7

The Hellwig Adjustable Big Wig Rear Anti-Sway Bar #HE94FR is only going to leave a few inches between it and the spare tire, as you can see in the attached picture. Depending on how far forward you have the tire it could potentially interfere with…

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

The air suspension system on your 2022 Ram 2500 limits your options for suspension enhancement. None of the air bags made for your truck will be compatible. Instead, I recommend adding the SumoSprings Rebel Custom Helper Springs #SS64VR. The…

view full answer...

Answer 10

According to RoadActive Suspension the spring rate for the standard kit #RAS3611-S is 2,400 lbs. For the heavy duty #RAS3611-SHD it is 3,600 lbs. The heavy duty #RAS3611-SLHD is the same but only designed to fit if you have factory top overload…

view full answer...

TorkLift Camper Tie-Down Compatibility With A 2002 Ford F-250

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching