Can an E-Track like EM59150 Install Across More than One Board  

Backing plates, like the etrailer Backing Plate #e96RR, are always a good idea. Using bolts and backing plates will provide a more secure installation of the Erickson E-Track. You will want to use 4 bolts per backing plate. If you do decide to use…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

In order to wire your cargo trailer for both 12 volt DC and 110 volt AC power you would need to install a AC/DC distribution panel and power converter which we currently do not offer. You would then wire the 12 volt power to the converter along with…

You can absolutely install E-Tracks like the etrailer Horizontal E-Track - Black Powder Coated Steel - 2,000 lbs - 94" Long - Qty 4 #e42VR you were looking at in your Forest River Enclosed Cargo Trailer yourself. Now there are a few things to…

Thank you for the pictures, using the provided pictures I was able to tell that you have the Furrion Vision S wireless system. You have 3 monitor options for that system and I have listed them below. For a 4.3" monitor you can use the…

Yes, the Replacement 7" Monitor for Furrion Vision S Wireless RV Camera System #FR47FR and the Replacement 4.3" Monitor for Furrion Vision S Wireless RV Camera System #FR77FR are compatible with and use the same cameras.

That is a good question, and you will need to use three backing plates for each 5 foot section of e-track, so the exact part you will need is the following: - etrailer E-Track Backing Plates w/ Hardware - Qty 3 #e46RR These will fit perfectly with…

According to Roadmaster the estimated installation time for the BrakeMaster Second RV Kit for Hydraulic Brakes #RM-98300 is 2 hours. This is for someone who is familiar with the product and installation process. If this isn't something you…

Your plan of having an e-track like the part #E19148 attached to two different floor boards in your trailer would be perfect. This will distribute any weight on the e-track to two boards which is a sturdier way to go about it.