Hand Rail that Can Attach to Side of RV

Question

Question:

Camper bumper makes hand rails to short. I cannot upload picture to your site but can email to you.

asked by: Kirby W

0

Expert Reply:

I am not sure what bumper hand rail you have now but you could use the Stromberg Lend a Hand part # AM-533 as a way to help get in and out of your RV. This is a pretty large handle that folds up against the side of RV when not in use.

This can attach to basically any RV sidewall and I attached an install video link to this page as well.

expert reply by: Jameson C

0

Answer 1

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...

Answer 2

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 3

The installation instructions for this product are recommended for individuals who have experience winding torsion springs. If you have not worked with a torsion spring system before, we recommend contacting a local garage door company to install…

view full answer...

Answer 4

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106 will…

view full answer...

Answer 5

The Trailer Leaf Spring, 2250 lbs. 6 Leaf, item #e27SR, is sold as a replacement spring for older trailers and measures 26 inches for eye to eye, center to center. If you are replacing the springs and hangers you will need to use the same center to…

view full answer...

Answer 6

From what I can find of your Jingu 17.5 X 6.75 tire is that it has the same wheel size and bolt pattern as the Americana Modular Wheel w/ -0.5 Offset - 17-1/2" x 6-3/4" Rim - 8 on 6-1/2 #AM22461. It also has the same max load capacity of…

view full answer...

Answer 7

That is a good question, and you can leave your current fold-out steps up and in the folded position when installing the mounting bracket of the Brophy Scissor Steps. The reason is, the bracket will be installed just underneath the door so as long as…

view full answer...

Answer 8

Yes, we can ship the Space Dock 2" Receiver Adapter for Torklift Palomino Landing Pad Bumper part #TLA7900 to you in Canada! However, the quoted shipping costs does not include all brokerage fees and duties. Taxes are not included and all prices…

view full answer...

Answer 9

The Shelby 5404 winch is a 1,200 lb winch with a 20 foot nylon strap. The Dutton Lainson part #DL14996 is a similarly rated 1,500 lb winch and for a strap you would need the part #DL24249. This setup would be slightly stronger and less likely to bend…

view full answer...

Answer 10

The BoatBuckle Boat Winch Strap with Hook and Safety Latch part #IMF05848 will be the perfect replacement strap option for a Shelby Trailer Winch 5404. It's a 2" wide strap rated at 1,333 lbs.

view full answer...

Answer 11

The Lippert Handrail for Victory Step Manual Fold-Down Steps #LC726866 comes with the hand rail and the fastening knobs for attaching them. The only thing missing that your steps would have are the two metal brackets that the hand rail slides into…

view full answer...

Answer 12

It sounds like you're looking for a 3 foot long supply hose; typically the outlet end of a regulator will almost certainly be a 3/8" female NPT and from the picture you sent it looks like you've got a female flare connector on the other…

view full answer...

Hand Rail that Can Attach to Side of RV

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching