Could Lippert Electric Ground Control TT part # LC672136 Fit Jayco Eagle

Question

Question:

I have a 2018 Jayco Eagle the GVWR is 11,990. Would this leveling system be big enough to to work on my travel trailer? Thank you,

asked by: Theron H

0

Expert Reply:

If you would keep the weight of your 2018 Jayco Eagle under the 10,000 lb weight capacity of the Lippert Ground Control TT part # LC672136 it would work but if you knew it would be over that figure it would not be rated properly.

expert reply by: Jameson C

0

Answer 1

Yes, the Lippert Electric Ground Control TT Automatic 5-Point Travel Trailer Leveling System item #LC672136 will work with your 2018 Bigfoot 25RQ travel trailer. Your trailer is well within the weight limit capacity of the Lippert auto leveling…

view full answer...

Answer 2

The Lippert Electric Ground Control TT 5-Point Leveling System #LC672136 referenced in your question has a total weight of right around 480 pounds. This leveling system features 5 motorized jacks that can be operated by the included control panel or…

view full answer...

Answer 3

The individual jacks of the Electric Ground Control TT Automatic 5-Point Travel Trailer Leveling System #LC672136 do not have a specific rating as they are designed to work together on this kit which is designed for travel trailers that weigh up to…

view full answer...

Answer 4

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 5

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 6

If the trailer wheels scrubbed (dragged and scrapped the ground instead of rolling) when jack knifed then it could have thrown something out of alignment or damaged something. First, inspect the suspension. Look for any elongated holes where…

view full answer...

Answer 7

What you're going to need is two of the transfer switches in that case. I have attached a diagram from Furrion that shows you how you're going to need to hook the two transfer switches #F30ATS up: -one to the other, then one branching off to…

view full answer...

Answer 8

The Replacement Amber Lens for MC32AB Trailer Lights #A32AB is a direct replacement for the SAE A P2 DOT 14 and would be what you'd need.

view full answer...

Answer 9

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...

Answer 10

The best modern day size replacement option we have for a 6.00-16 is a 235/80-16 which measures 30-7/8" diameter x 9-3/8" wide. For this, I recommend the Kenda Karrier ST235/80R16 Radial Trailer Tire with 16" Black Mod Wheel part…

view full answer...

Answer 11

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 12

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Could Lippert Electric Ground Control TT part # LC672136 Fit Jayco Eagle

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching