Does Replacement Square Head Bolt part # 853-208909 Have Weight Capacity

Question

Question:

I am looking to mount a bike rack on the side rail on my Yakima bed rack. Can you tell me the weight capacity of these bolts? I would use four bolts to support a Yakima bike rack and bike.

asked by: Robert K

1

Helpful Expert Reply:

The Replacement Square Head Bolt part # 853-208909 does not have a weight capacity as it was designed to hold on a fairing and not hold on rack accessories.

If you can let me know what roof rack accessories you have we can see if there's a similar option we can set you up with.

expert reply by: Jameson C

1

Answer 1

While Thule unfortunately does not make a complete parts bag for the Thule Hullavator #TH898 anymore, we do have individual replacement parts available for purchase. For instance, if you need a replacement M6 socket screw, that is the Replacement…

view full answer...

Answer 2

I called Thule and they do not have an official measurement spec available for this part. Because the reported measurement results are not consistent, I went to our warehouse and took a 9 piece sampling and measured the Thule Replacement Square…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 5

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 8

There are a couple of differences between the two. The JetStream bars like #Y00425 are made of extruded aluminum while the CoreBars such as the #Y00421 you've looked at are constructed of galvanized steel. As you've mentioned, the CoreBar has…

view full answer...

Answer 9

The Rhino-Rack Heavy-Duty Roof Rack Roof Rack have specific C-channels that are designed to fit specific Rhino-Rack Heavy-Duty accessories, like the Rhino-Rack Hi-Lift Jack and Shovel-Holder Brackets #RRRCB-RSHB-RJHB as an example. That's the…

view full answer...

Answer 10

The Malone Universal Crossbar System #MPG201 is a more economical choice but it still does a good job. The design and quality of Thule's system is why they have such a large difference in price. Whether you go with the Thule Crossroads system…

view full answer...

Answer 11

There is a roof rack that will fit your 2016 Fiat 500X that has the panoramic sunroof, the Inno Aero. This rack is made up of Aero Crossbars #INXB100-108, Flush Feet for Aero Crossbars #INXS200, and Custom Fit Kit #INK482. This rack has a 100 lbs…

view full answer...

Does Replacement Square Head Bolt part # 853-208909 Have Weight Capacity

Product Page this Question was Asked From

Continue Researching