Troubleshooting Passenger Side Running Light On Tail Light Not Working
Question:
Existing dimensions are as follows. Base Frame 8 9/16 X 3 11/16 Base mounting Hole Centers' 7-1/8 X 2-9/16 Existing Mounting not relevant if replacement larger. Looking for LED light.
asked by: Edmund P
Expert Reply:
Thanks for the picture!
Based on the color of the wiring used on the light your red wire should be the turn signal and brake light wire, the black wire should be the running light wire, and the white wire should be the ground.
You can confirm this by using a circuit tester like # PTW2993 to test the wires while a friend turns on the running lights, and hits the brakes and turn signals.
Now since wire nuts were used, it is possible that the connections are not secure as they can come loose. I recommend testing the trailer light wiring to make sure power is making it through the connections.
If you find there is no power making it past the connections then I recommend replacing the wire nuts with heat shrink butt connectors # DW05745-5 which will give you a much better, and more secure connection.
If the light is getting power and still not working then you will need to replace the light. If you can send me a picture of the lights and the dimensions I would be happy to recommend a replacement for you.
Products Referenced in This Question
LED Trailer Tail Light with License Bracket - Stop, Turn, Tail, License - Red Lens - Driver Side
- Trailer Lights
- Tail Lights
- License Plate
- Stop/Turn/Tail
- Rectangle
- Surface Mount
- Non-Submersible Lights
- LED Light
- 8-11/16L x 5-7/8W Inch
- Red
- Command Electronics
more information >
LED Trailer Tail Light - Stop, Turn, Tail - Red Lens - Passenger Side
- Trailer Lights
- Tail Lights
- Stop/Turn/Tail
- Rectangle
- Surface Mount
- Non-Submersible Lights
- LED Light
- 8-11/16L x 3-7/8W Inch
- Red
- Command Electronics
more information >
Deka Heat Shrink Butt Connector - 12-10 Gauge - Nylon Insulation - Yellow - Qty 5
- Wiring
- Wire Connectors
- Butt Connectors
- 12-10 Gauge
- Deka
more information >
Product Page this Question was Asked From
LED Trailer Tail Light with License Bracket - Stop, Turn, Tail, License - Red Lens - Driver Side
- Trailer Lights
- Tail Lights
- License Plate
- Stop/Turn/Tail
- Rectangle
- Surface Mount
- Non-Submersible Lights
- LED Light
- 8-11/16L x 5-7/8W Inch
- Red
- Command Electronics
more information >
Continue Researching
- Video: Optronics Wiring - Trailer Connectors - A25W2GWB Review
- Shop: Trailer Wiring
- Shop: 25 Ft 4-Way Trailer Wiring Harness - Wishbone Style - 25' Ground
- Video: Performance Tool Hook Probe Circuit Tester Review
- Search Results: 5 way trailer wiring
- Article: Troubleshooting 4 and 5-Way Wiring Installations
- Article: Trailer Wiring Diagrams
- Q&A: How To Wire 4-Pole Harness with 5 Wires
- Q&A: Troubleshooting Wishbone Wiring
- Shop: 40 Ft 5-Way Trailer Wiring Harness - Wishbone Style - 30" Ground - 5' Auxiliary Wire
- Search Results: heat shrink butt connector
- Shop: Deka Heat Shrink Butt Connector - 12-10 Gauge - Nylon Insulation - Yellow - Qty 10
- Shop: Deka Heat Shrink Butt Connector - 16-14 Gauge - Nylon Insulation - Blue - Qty 10
- Shop: 25 Ft 5-Way Trailer Wiring Harness - Wishbone Style - 30" Ground - 5' Auxiliary Wire
- Video: Optronics 7 Pole to 5 Pole Flat Adapter Review
- Search Results: 7 way to 4 way adapter
- Search Results: adapter 4 way flat to 7 way blade
- Shop: Hopkins Plug-In Simple Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector
- Q&A: Replacement 7-Way Trailer Connector that Uses Traditional Wire Coloring
- Q&A: What Parts Are Needed To Change a Trailer 6-Way Round Pin Connector to a 7-Way Round Blade Connetor?
- Shop: Hopkins 7-Way Blade Style Connector with Molded Cable - Trailer End - 8' Long - Auto Standard
- Shop: Roof Rack
- Video: Hopkins Wiring - Trailer Connectors - HM47910 Review
- Shop: Trailer Hitch
- Video: Choosing the Right Trailer Wiring
- Search Results: 44649
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Video: Choosing the Right Brake Controller
- Search Results: 68149
- Q&A: How to Determine if Trailer Axle is Not Aligned and How to Measure to Replace Trailer Axle
Edmund P.
5/14/2021
Existing dimensions are as follows. Base Frame 8 9/16 X 3 11/16 Base mounting Hole Centers' 7-1/8 X 2-9/16 Existing Mounting not relevant if replacement larger. Looking for LED light.