About How Long to Install Blue Ox Base Plate Kit BX1724 on 2018 GMC Sierra

Question

Question:

HI, I AM WONDERING WHAT THE ESTIMATED INSTALL TIME IS ON A BLUE OX BASE PLATE FOR A 2018 3500 GMC THANKS

asked by: JAKE H

0

Expert Reply:

I've asked our installers about how long it takes to install a base plate kit like the Blue Ox part # BLU22QR on a truck like your 2018 GMC Sierra 3500 and they've told me to set aside about an afternoon to do so.

To see more info on how this installs check out the install video link I attached to this page as well.

expert reply by: Jameson C

0

Answer 1

Yes, you can mount the hand rail that comes with the Econo Porch Trailer Step part #EHS-103-R on either side.

view full answer...

Answer 2

From the ground to the top of the platform on the Econo Porch Trailer Step with Handrail #EHS-103-R measures 27-1/2 inches. While I don't know exactly what the distance from the ground to the door threshold is on your 2016 Forest River Cardinal…

view full answer...

Answer 3

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 4

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 5

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 6

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...

Answer 7

I checked with Curt and they do show the Curt Trailer Hitch Receiver part #C13233 as a fit for a 2022 Volvo XC90 All Models which includes the Recharge.

view full answer...

Answer 8

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex Suspension Kit part…

view full answer...

Answer 9

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...

Answer 10

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 11

The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you, but…

view full answer...

Answer 12

When installing/adjusting the Solera RV Slide-Out Awning #LCV000163285 tension is applied by rotating the awning roller 14 times. This should apply the needed spring tension so that the fabric doesn't billow in the wind or leave enough slack that…

view full answer...

About How Long to Install Blue Ox Base Plate Kit BX1724 on 2018 GMC Sierra

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching