Handrail for Second Generation MORryde StepAbove

Question

Question:

I am looking for a handrail that attaches to your steps. Its a 3 step with the name step above. I have a2021 heart land mallard m25.

asked by: Lawrence W

0

Expert Reply:

For your Second Generation MORryde StepAbove, please take a look at the, # MR83AR. This is designed specifically for the steps you have.

expert reply by: Michael R

0

Handrail for Second Generation MORryde StepAbove
(click to enlarge)

Answer 1

Yes, we do have just what you need with the MORryde StepAbove RV Steps for 23-3/4" to 26-1/4" Wide Doorways - 3 Steps #MR98RR. You will need to slightly adjust the brackets (pictured below) by unscrewing the bolts and sliding them inward to…

view full answer...

Answer 2

For your 2021 Keystone Passport SL Travel Trailer with an entry height of 32" and door width of 24", yes, the correct SolidStep Manual Fold-Down Steps is option, #LC698799. Currently these are not in stock. However, I do have a couple of…

view full answer...

Answer 3

The easiest way to determine if you have a first or second generation MORryde Stepabove 3-step setup is to look at the way the step legs lock and adjust. If they have a removable pin you have a first generation and need the part #MR93RR. If instead…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 9

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 10

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...