This sturdy steel replacement bumper has a diamond tread surface to provide grip as you step into your truck bed, built-in hitch ball holes, and an 8,000-lb capacity. Powder coat finish resists rust. Custom mounting kit sold separately.
Features:
Specs:
Constructed of high-strength steel, this rugged utility bumper is sure to last. The silver powder coat finish helps to resist rust and corrosion while also providing sleek styling. And the ribbed face improves both the appearance and the strength of the bumper.
The diamond tread design on the top of this step bumper provides a tough, non-slip surface for you to easily climb into and out of your truck bed.
Designed to meet or exceed the towing capacity of your vehicle's factory bumper, this Fey Diamondstep bumper can haul up to 8,000 pounds when you add on a hitch ball (sold separately), which must have a 1-inch-diameter shank.
California residents: click here
Average Customer Rating: 4.5 out of 5 stars (303 Customer Reviews)
This sturdy steel replacement bumper has a diamond tread surface to provide grip as you step into your truck bed, built-in hitch ball holes, and an 8,000-lb capacity. Powder coat finish resists rust. Custom mounting kit sold separately.I am very impressed with this bumper. I bought it as a replacement for my 77 Ford F150. I've been restoring this truck since 2006, and the original bumper was too far gone to save. I was trying to match the original as closely as possible and this one was perfect.
It came with everything needed, right down to the license plate lights and bulbs. It was easy to install with the supplied directions and it looks great on the truck! Good price, free shipping, and very good quality. Five stars all day long.
I ordered the bumper and mounting hardware and it all came quickly. It took me less than an hour on the install and everything was still in good condition with no scuffs or scrapes. Has looked good since and the plate lights still work
Received the item just in time to put it on the truck. Both the price and service advisors are great. Will deal with again should I need other parts.
The bumpers exterior box was badly damaged and torn. The bumper came in good condition but we had to straighten one corner of the bumper that bent during shipping. Thanksfully we have an Auto Body Shop.
The bumper looks like what would have come on the truck when new. But the width is narrower the OEM. Looks like a bumper for a midsize pick up. It does not look like what is shown in the pictures. Does noes go the full width of the rear of the pick up bed. When I called about this, there was little care in my question.
So with that said, would I buy from them again, no.
Bumper installed easily and looks great. Frame bracket holes lined up perfectly, and the bumper lined up on the brackets with very little effort. It took me about 1 hour to remove the old bumper and install the new bumper. Recommend having an assistant to at least help hold the bumper while lining the bolts up. It is exactly what I expected. The safety chain holes are a bit further from the edge than my old bumper, but I picked up two shackles and that issue was resolved.
I'm very satisfied with the quality and fit. Other bumpers on the internet may look the same but they are not the same quality. I tried a cheaper one and it was very cheaply made. e trailer is the way to go. They kept me informed
thru ordering process. E trailer and staff did a great job for me.
These are EXACTLY what I wanted for my 1970 C-10. However they do not fit. I understand it is a universal fit, but that is why they ask for the year so they can give you the correct brackets. Their response was "Your only other option would to have something or brackets fabricated to fit your specific vehicle." The whole reason I bought them was because they were supposed to fit. Maybe once I spend $[XX] in parts trying to figure it out and cutting into my truck! I will feel different, but i would have rather spent more money upfront and not have the headache.
My Grandson, who installed it said that it didn't hook on the truck like it should, and I should use it on little loads. It looks good!!
The new bumper arrived yesterday (very fast). The box was unfortunately very damaged and had been taped. I have attached pics of how it arrived.
I opened everything and amazingly all the parts are here.
The bumper did sustain a minor scratch but is not damaged or twisted.
I have not try to install this yet so with the minor damage shown how should I proceed?
bumper looks to be well made and sturdy I did not have a chance to mount it as of now because of the weather here but I don't foresee any problems
I ordered the wrong reat bumper...etrailer made it simple to return and got me the part I needed quick. Great place to shop!
finally got chance to install bumper on truck. the installation was rather simple a little akward for 1 person to do but I was able to install it fairly easily. This bumper is a great fit on my truck. The only fault I found was my truck had factory reciever hitch, so had to remove a bracket holding hitch to install bumper otherwise the bumper fit nicely. I would recommend this product to others. Attached are some before and after pics.
My Westin Diamondstep Replacement Bumper was installed almost flawlessly by a good friend. It arrived in perfect condition, and even had a replacement license plate light kit included that I wasn't aware of. As you can see from the photo, my new Westin Diamondstep Replacement Bumper looks great installed on my 1999 Dodge Dakota. If you are looking to replace your rusted out rear bumper, the Westin Diamondstep Replacement Bumper is a good choice.
WE ARE MOUNTING IT NOW AND IT LOOKS GOOD. IT DID ARRIVE WITH MINOR DAMAGE. THE TOP DIAMOND PLATE WAS LIFTING OFF THE CENTER OF THE BUMPER.WE WERE ABLE TO REPAIR IT.
eTrailer had the bumper for our customer in stock. It arrived quickly and fit perfect.
This bumper did not fit my truck. The bracket kit that was ordered for it would not work, as my truck has a factory tow hitch. I have not been able to use the bumper.
Excellent bumper
Hi
Bumper came in box thin box with no end protection so the ends are chipped an rusting
Area for licensed plat
Mounting screw holes are to far down so tags are below metal edge of bumper
Police can’t see tags
I had to drill holes in licensed plat a raise up plat
Now licensed plat is to high up / past the top of bumper/ so tailgate hits top edge of plat
I had to been top edge of licensed plat backwards
Something wrong with bumper size
I probably should of returned an got original equipment bumper
I thought I was getting original equipment
Don’t buy
1997 Ford F-350 XL 4x4 - Great bumper and excellent customer service from etrailer. My truck has the 37" width frame so you have to flip the mounting brackets so they are narrower to the bumper. Everything bolts directly on, no drilling.
Great product, especially for the price. Instructions and videos were good also. the only issue I had was the holes didnt line up perfectly on the frame, even though I had the exact year make and model of truck that the bumper was for. I had to drill one hole in each side of the frame to get a third bolt in (the rear bolt in the picture) and strengthen in up a bit. Id highly recommend this product and etrailer as well. Good experience!!!
The quality is very good for the price! The only thing that need to be corrected are, the instructions show mounting the mounting brackets opposite of how they actually mount and bolt to the bumper. The higher hole goes to the inside not the outside. The only other thing that needs changed, is the length of 2 of the standard bolts in the kit. 2 of them are very hard to get the thread started with both a flat and lock washer. Other than that, this is a nice product at a nice price point
I recently bought a bumper for my Dodge pickup from Etrailer. The product is everything they said it would be. The installation was quite simple and the quality is 10 out of 10. I found the personnel extremely helpful and would recommend their products to everyone. The bumper fit perfect as you can see by the pictures. Again everything is a 10 out of 10. Thanks Bob
Recieved my bumper on the date expected. The bumper came in a nice box with plenty on protective wrap and all the necessary hardware. Directions were simple read understand and the bumper was installed in 15 minutes without any problems. Everything in the description came with the bumper also. I would recommend this bumper and or buy another if needed in the future. My truck is a 1992 jeep comanche. Very happy with this bumper kit.
How about a rear bumper for a square body chevy.When it's shipped to me and I received it it was damaged.I called customer service at Etrailer.com and they promptly sent out a replacement bumper. This bumper was awesome. Bright shinny chrome Dimond plate.Installed it that night. It looks great on it. Thanks Etrailer and customer service. I will definitely be a return customer.
Do you have a question about this Bumper?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.