2009 Lance 830 Truck Camper Cover Recommendation

Question

Question:

Hi - will this fit my 2009 Lance 830? Thanks!

asked by: Neal Y

0

Expert Reply:

I did some research and it looks like your Lance 830 measures in at 16'9" in length and 9' in height. With that in mind the Adco SFS AquaShed Truck Camper Cover # 290-12264 does not look like a fit but I've found a solution; The Camco UltraGuard Slide-In Camper Cover # CAM45770 measures in at 18'2' in length and 9' in height, and will fit your 2009 Lance 830.

expert reply by: Bryce D

0

Answer 1

When the TorkLift Camper Packer Camper Stand Kit #TLA7010 is assembled it has a capacity of 6,000 lbs so as long as your camper weighs less than that there's no reason you couldn't stay in it.

view full answer...

Answer 2

The Camco UltraGuard Slide-In Camper Cover - 18' Long #CAM45770 is designed for use when a stored on the landing gear legs or saw horse style stands like the TorkLift Camper Packer Camper Stand Kit #TLA7010. The cover reaches 108 inches tall at…

view full answer...

Answer 3

Different species and grades of wood have different characteristics for durability and strength. Unless you have a trusted local lumber yard you can rely on for guidance I recommend using the TorkLift Camper Packer Camper Stand Kit with Lumber…

view full answer...

Answer 4

The specs I'm seeing for your 2007 Palomino Maverick M-1000 truck bed camper show it being 18' in length so I recommend the Adco SFS AquaShed Truck Camper Cover - 17-3/4' Long - Gray #290-12264. This heavy-duty, 3-layer fabric cover will…

view full answer...

Answer 5

From what I could find it looks like a Lance 975 slide-in camper is 19-1/2' long so the Camco UltraGuard #CAM45770 for 18' campers isn't quite long enough. The Camco UltraGuard #CAM45773 is designed or 19-1/2' campers but you'll…

view full answer...

Answer 6

I am happy to help you figure out the cover that you need for the 2011 Palomino 1000 to withstand the harsh Michigan winter. I believe the Palomino 100 is a truck bed camper. I have attached a diagram that shows where to measure to get the correct…

view full answer...

Answer 7

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 8

Hey Richard, thanks for reaching out! The Dexter DX7.5 Drop-N-Go Brake Actuator #099-175-00 is a great option for a replacement actuator because it's a direct replacement for the common Model 60 actuators that were popular in the '90s.…

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

Your 2024 Chevrolet Silverado 3500 will come with a 2-1/2" trailer hitch receiver. If your truck did not come with a reducer for a 2" receiver we do have the B&W #BWRHXA2182 if you need to use your 2" ball mount or hitch mounted…

view full answer...

2009 Lance 830 Truck Camper Cover Recommendation

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching