TorkLift TLA7310S StableLoad Suspension Upgrade Kit Fit on 2021 Chevy Silverado 3500 Diesel Dually

Question

Question:

I own a 2021 Chevy 3500 diesel dually. Will this product work?

asked by: Jim B

0

Expert Reply:

As long as your 2021 Chevy Silverado 3500 Diesel Dually has lower overload springs, the # TLA7310S TorkLift StableLoad will work great for you.

I've linked to an installation video that you might find helpful. The StableLoad is a no drill application, and the nice thing about this system is you can easily disconnect it to return your ride to normal when you're not towing or hauling.

expert reply by: Mike L

0

Answer 1

I had the #TLA7310S pulled from stock, and found that the thickness of the spacers that sit between the lower overload spring and the bottom of the spring pack is 7/8 of an inch which is the same for the fronts and rears. I've linked to an…

view full answer...

Answer 2

The lateral angle of the Torklift StableLoads part #TLA7310S is designed to make engaging the system a bit easier, but as you can see in the picture I attached when they are engaged the support is across the entire overload spring. I also attached a…

view full answer...

Answer 3

Yes, you will be able to use the TorkLift StableLoad #TLA7310S on your 2023 Ford F-150 with the headlight leveling system. This system is designed to work on leaf sprung trucks with the lower overload springs. As it attaches to the overload spring it…

view full answer...

Answer 4

The RoadActive Suspension Custom Leaf Spring Enhancement Kit #RAS3611-YHD will provide a more stable ride on your 2018 Ford F-150. Since this system is active as soon as you install it on your F-150 it does not require the additional load to compress…

view full answer...

Answer 5

The TorkLift StableLoad Suspension Upgrade #TLA7310S that you referenced basically allows the overload springs of the vehicle suspension to engage sooner to gain additional suspension support whereas the RoadActive Suspension kit #RAS4611 basically…

view full answer...

Answer 6

The blocks on the TorkLift StableLoad #TLA7202 are 2-1/2" tall.

view full answer...

Answer 7

I spoke with my contact at Brophy and they stated you'll be fine using the Brophy Clamp On Camper Tie-Downs - Bed Mount - Black Powder Coated Steel - Qty 4 Item #HSWB as long as the railing on the back of your 2008 Chevy Silverado isn't over…

view full answer...

Answer 8

Brophy Camper Tie-Downs #HSWB do not have a weight rating since they do not support the camper's weight. The truck bed and frame handle that actual camper load and the tie downs provide stability to prevent the camper from shifting in the bed.

view full answer...

Answer 9

According to CR Brophy, the camper tie down brackets you'd looked at, part #HSWB are specifically designed to fit the bed of a 2019 Ford F-250 and 350. There does indeed need to be 2 inches of available space under the lip of the truck bed side…

view full answer...

Answer 10

To help suspend payload carried in the truck's bed, I'd recommend using #TGMRCK25D, which are rated up to 8600 lbs. Keep in mind, these will NOT increase the manufacturer's stated suspension capacity. For a slide-in camper or salt…

view full answer...

Answer 11

The correct TorkLift StableLoad Rear Suspension Upgrade with Quick-Disconnects for a 2005 GMC Sierra 3500 is part #TLA7310 or part #TLA7310S for stainless.

view full answer...

Answer 12

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...