Does Manual Override Button for Curt Echo Work if App is Open in Background

Question

Question:

I’m would like to add the Manual Override Button for Curt Echo Brake Controller Item # C83HR to my curt echo. I know it says that the button has to be used in conjunction with the phone app. However, if I keep the app open in the background of the phone and switch to google maps can I still use the button for manual trailer brake engagement without having to switch back to the curt echo app on the phone first?

asked by: Mike

1

Helpful Expert Reply:

As long as the app for the Curt Echo # C51180 is running in the background of your phone the manual override part # C83HR is going to work. It would require you killing the app for it to stop working.

expert reply by: Jameson C

1

Craig

4/3/2024

Why do you need a Manuel override if it doesn't work when the ap doesn't;t work?

Reply

Jameson C.

4/3/2024

@Craig Manual override on a brake controller is used mostly as a way to curb sway when on the highway. Usually just a slight grab of it will pull the trailer straight and stop it. Other than that it's use is pretty situational. Like some use it when testing to make sure their fifth wheel hitch is connected solidly to their trailer before taking off. They will have the jacks only slightly off the ground, activate the override lever, and then try to drive off. If the trailer stays connected you are good to go but if the hitch wasn't connected you'd pull away from it.

Reply

Answer 1

When towing with the Curt Echo Mobile Trailer Brake Controller #C51180 installed I do recommend having the app/software opened up on your phone during travel, however it is not required for proper operation. The ideal setup would be to have the…

view full answer...

Answer 2

In order to access the internal battery of the Curt Echo Manual Override Button #C83HR you'll want to remove the stick on the back to reveal a notch where you'll need to use a very skinny screwdriver to pry up on the unit; once you…

view full answer...

Answer 3

You can use the Android Auto Navigation and the Curt Echo Brake Controller #C51180 will still run in the background at the last settings you had it on. However, you are correct that when using the navigation, for the manual override you will need the…

view full answer...

Answer 4

Great question! The Curt Echo Wireless Trailer Brake Controller #C51180 will operate using the settings you choose in the app on it's own - you can technically just turn your phone off after everything is paired and the unit will apply the…

view full answer...

Answer 5

I recommend to use the Curt Echo Mobile Trailer Brake Controller part #C51180 in the 7-Way of your 2019 Chevy Silverado 3500 to bypass the factory controller. The Curt Echo only needs an active 12V circuit on the 7-Way to function because of it's…

view full answer...

Answer 6

What's interesting about weight distribution systems is that their weight does not get factored into the tongue weight when picking out the system. We've asked our weight distribution manufacturers this question several times and basically…

view full answer...

Answer 7

With the Curt #C51180 Wireless Brake Controller connector plugged into the tow vehicle, the safety strap wraps around the plug and receptical door so that it cannot come unplugged. I have attached a picture of the strap in use. Regarding your missing…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

If you have a vehicle specific wiring harness for a brake controller then that would indicate that you have a factory tow package and subsequently would already have a 7-way at the back of your vehicle. The universal 7-way connector #ETBC7 is meant…

view full answer...

Does Manual Override Button for Curt Echo Work if App is Open in Background

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching