Demco Base Plates DM9523062 Review Video

Depending on the style of the Demco baseplate you could need a different adapter for your Roadmaster Sterling All Terrain Tow Bar #RM-576. For a tabless-style you would need part #DM9523062 since your serial number is higher than 14,500. For a…

In regards to the Stealth Hitches Hidden Rack Receiver part #391TES317 which is a fit for a 2020 Tesla Model 3, there will need to be an opening made in the underbody panel to allow for the receiver to protrude through. In some cases, there is…

You will want to connect the alert wire as indicated in the instructions because in certain situations the lighting signals from the motor home could override the lights on the Jeep and the indicator would not give you the correct reading. If it is…

The warning light for the Invisibrake needs to connect to the stoplight switch circuit of the towed vehicle so that you know when the brakes of the vehicle are getting applied. This would not be a connection made on the Freightliner's wiring like…

Sure thing! For your Demco Tabless Base Plate Kit #DM9519336, you will either need the: -Adapter for Roadmaster Sterling Tow Bars to Demco Classic Base Plates #DM9523062 if your Sterling tow bar has a serial number below 14,500, Or the, -Adapter for…

Typically if the baseplate doesn't have a nice spot to mount the breakaway we just screw it into the fascia using the small bracket that comes on the switch. If we're needing to space it out a bit we typically use a bracket like #18140 and…

It sounds like you are looking for the Replacement Attachment Tabs for Demco Tabless Base Plates #DM86MV. This includes both tabs and are the correct replacement tabs for the Demco Tabless Base Plate Kit #DM9519291.

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

Aside from the diagram in the linked instructions for the InvisiBrake #RM-8700 (see attached) the next best thing we have is an installation video of the Roadmaster Diode 7-Wire to 4-Wire Flexo-Coil Wiring Kit #RM-15247 being installed on a 2021 Jeep…

Yes the Roadmaster base plate kit part #RM-521424-5 that you referenced does fit the 2005 Jeep Wrangler you sent in a picture of as I can see that it has coil front suspension and not leaf spring front suspension.

The Replacement Connecting Clevis for Demco Commander Tow Bar #DM13582-81 shank is 1-1/2 inches by 5/8 inch. The flanges are 1-3/16 inches apart. I've attached a photo with these dimensions to assist.

The vertical bolt on the Adapter for Roadmaster Sterling Tow Bar to etrailer Classic Base Plates #e98984 is 1/2” X 3”. I went ahead and attached a parts outline from the instructional manual to provide you with better perspective.