Wireless LED Tow Bar Light with Magnetic Base

Question

Question:

So I dont use any of my cars wiring the lights will automatically work wireless and can make the brakes , signal.s And tail lights work Or am I reading it wrong

asked by: David G

0

Expert Reply:

The Custer Wireless LED Tow Bar Light with Magnetic Base, # LIW-LDTL is a wireless system that sets on your towed vehicle to provide the needed brake and turn signal indicator lights instead of using the wiring and lights on your towed vehicle. Made in USA and DOT compliant.

expert reply by: Michael R

0

Answer 1

A 4-way would not be able to carry a separate brake light from a turn signal but if you used a signal converter and a kit with additional diodes you could separate out the turn signals from the stoplights. For most people it's easiest to wire…

view full answer...

Answer 2

Yes, you can use the Curt Universal Tail Light Wiring Kit for Towed Vehicles #C63CR to sync your motorhome lights to your 2012 Toyota RAV4. This part will make the RAV4's lights work as a combined system while it is being towed. It is legal for…

view full answer...

Answer 3

We can get your 2020 Ford Ranger set up with a tow bar wiring system, and instead of a wiring kit with separate diodes, I recommend going with an option from Curt: - Curt Universal Tail Light Wiring Kit for Towed Vehicles #C63CR The Curt wiring kit…

view full answer...

Answer 4

The Curt tow bar wiring kit part #C63CR that you referenced can install on a vehicle that has separate taillights like you have but there is a different wiring required when installed on a vehicle like then instead of a combined setup. You would run…

view full answer...

Answer 5

We have the Roadmaster Charge Line Kit part #RM-156-25 which was designed to provide a charge circuit from the motorhome to the battery of the tow vehicle like what you have. No other components like diodes would be needed.

view full answer...

Answer 6

Yes, for the original Brake Buddy Classic Braking System we have the Replacement Breakaway System #HM39303. This will replace all the components of the breakaway assembly so that the vehicle's brakes will activate if it should ever become…

view full answer...

Answer 7

To connect the Roadmaster Battery Charge Line Kit for Towed Vehicles #RM-156-25 to your tow vehicle, you're going first want to mount the included circuit breaker with the included self tapping screws. Next, you're going to want to strip the…

view full answer...

Answer 8

The Roadmaster battery charge line kit part #RM-156-25 would allow current/voltage to flow in either direction as it does not have a diode in it that only allows it to go one direction.

view full answer...

Answer 9

Since it will be connected to your motorhome, you do not need any type of battery charger in your 2019 Jeep Wrangler Unlimited when using the wiring kit from Curt: - Curt Wiring Kit #C63CR

view full answer...

Answer 10

It is normal for there to be voltage on both posts of the breaker that comes with the part Roadmaster Charge Kit part #RM-156-25. A breaker allows voltage to travel in either direction basically and serves the purpose of protecting the circuit from…

view full answer...

Answer 11

The red wire that connects to the battery on your 2016 Jeep Wrangler Unlimited will need to be attached to the silver terminal labeled as "auxiliary" on the circuit breaker that comes with the Roadmaster Battery Charge Line Kit part…

view full answer...

Answer 12

There is a possibility of back feeding but this should not really be of a concern as the odds of it happening are slim to none. If you did choose to use a diode then you would need one rated for the components it would be powering. The highest rated…

view full answer...

Wireless LED Tow Bar Light with Magnetic Base

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching