Fit of Thule TH629706 Motion XT Roof Cargo Box on Yakima JetStream Crossbars

Question

Question:

Will the Thule Motion XT L fit on Yakima Jetstream bars?

asked by: Andy

0

Expert Reply:

The Thule Motion XT cargo box, such as part # TH629706 is compatible with crossbars up to 3-1/2 inches wide by 1-11/16 inches tall. The Yakima JetStream crossbars, such as # Y00425 are 3-1/8 x 1 inch, so the box will fit perfectly on the JetStream crossbars with a bit of room to spare.

expert reply by: Mike L

0

Answer 1

If you were to use a Thule cargo box like the Motion XT #TH629806 then yes, this box is compatible with a Yakima round bar roof rack. Sometimes the mounting hardware that comes with roof accessories will require an adapter to fit different style of…

view full answer...

Answer 2

No, you cannot use Yakima Timberline Towers #Y33TR with Thule crossbars; you must use the same brand for the roof rack system as different brands are not made to be compatible with each other. The only parts that may be compatible among several…

view full answer...

Answer 3

Yes, the Replacement Door Assembly #8880631 is exactly what you need for the Yakima TimberLine Tower. To get the correct replacement lock and key you simply need to match what the current locks are. You can find the number on the side of the old lock…

view full answer...

Answer 4

There are a couple of differences between the two. The JetStream bars like #Y00425 are made of extruded aluminum while the CoreBars such as the #Y00421 you've looked at are constructed of galvanized steel. As you've mentioned, the CoreBar has…

view full answer...

Answer 5

We haven't tested this specifically on the 2021 VW Atlas but if you want to go with the Thule Motion XT XXL #TH629906 you will need to measure from the center of the front crossbar to the line where the roof and rear cargo hatch meet. The Thule…

view full answer...

Answer 6

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 7

I took some measurements of the Replacement Lid Support for Yakima Cargo Boxes #8880683 for you to compare with your Space Case Roof Box. From hole center to hole center when extended it measures 11 inches and when closed 3-3/8 inches. The overall…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 10

Hey Mark, so the correct Blue Ox base plate kit to use with the Blue Ox Ascent tow bar part #BX4375. is the part #BLU53FR. For lighting you can use #C96JR, and not have to worry about cutting into the taillight housing as this plugs inline with the…

view full answer...

Answer 11

The Rhino-Rack Roof Rack for Factory Tracks #Y02-490B-NT is going to be your best bet for the tracks on the ARE topper for your 2012 Toyota Tacoma. The weight capacity is 220 lbs like you mentioned, but that's going to be the highest you'll…

view full answer...

Answer 12

Thanks for all the details! We definitely have a way to get a cargo basket and an awning installed on your 2024 Toyota Highlander, although the aftermarket roof rack systems will use a clamping system with your door jambs instead of mounting via…

view full answer...