Aries Running Boards That Will Fit 2020 Mercedes-Benz Sprinter 2500 144

Question

Question:

Will these work on a 2020 mercedes sprinter 144?

asked by: Pete B

0

Expert Reply:

Yes, the Aries RidgeStep Running Boards - 6-1/2" Wide - Black Powder Coated Steel # AAC3696 will fit your 2020 Mercedes-Benz Sprinter 2500 with a 144" WB. One exception that Aries mentioned is the Sprinter models that have rear air conditioning. If it does have that, then these running boards will not fit.

For when you want the custom installation, the correct VersaTrac mounting kit for your vehicle is # AA2055113.

expert reply by: Evangeline M

0

Spencer

3/29/2024

trying to figure out if these will work for a 2023 sprinter 2500, your site says they wont but i cant imagine it being much different than a 2020

Reply

Jenny N.

4/30/2024

@Spencer I did confirm that the running boards part # AAC3696 and custom bracket kit part # AA2055113 will fit with a 2023 sprinter 2500 as long as it does not have rear air conditioning.

Reply

Answer 1

To mount the Aries RidgeStep Running Boards item #AAC3696 on your 2019 Mercedes-Benz Sprinter 2500 you will need the VersaTrac mounting kit item #AA2055113.

view full answer...

Answer 2

Yes, the Aries RidgeStep Running Boards will fit your 2023 Ford Transit T250. The #AAC3696 is just the running boards so you will need the #AA56FR which includes the custom mounting kit.

view full answer...

Answer 3

I have the right part for you. While the #AAC3696 unfortunately does not fit your 2022 Ram ProMaster 3500 with the 159" wheelbase, we do have the set that does. That is the Aries RidgeStep Running Boards w/ Custom Installation Kit - 6-1/2"…

view full answer...

Answer 4

Good news! I was able to get a exploded diagram as well as a set of instructions on how to replace the rod and gears #TJD-12000-RODNUT in the #12000 Series Ram Jacks made after 2012. I have attached them to this page for your convenience. Basically,…

view full answer...

Answer 5

It is going well and I'd be happy to help you! For a 2024 Honda CR-V Hybrid Sport, I recommend the etrailer Hitch item #e98848 you were looking at. We have confirmed through our vendor and customer reviews that this hitch will fit the hybrid…

view full answer...

Answer 6

The custom fit VanRug made for your 2015 Sprinter 2500 with 144in wheelbase is VanRug Custom Floor Mat for Cargo Vans - Charcoal Gray - Carpet #VRMS06M. It is designed for the cargo Sprinter Van and extends from behind front seats to under cargo…

view full answer...

Answer 7

The Aries RidgeStep Running Boards w/ Custom Installation Kit part #AA2055539 does come with 2 different length running boards. The longer 96" board goes on the passenger side and the 36" shorter board goes on the driver's side.

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

Hey Mark, so the correct Blue Ox base plate kit to use with the Blue Ox Ascent tow bar part #BX4375. is the part #BLU53FR. For lighting you can use #C96JR, and not have to worry about cutting into the taillight housing as this plugs inline with the…

view full answer...

Answer 11

Yes, your kick sensor for your hands free liftgate will still work after installing a Class III receiver on your 2024 Toyota RAV4 XSE. I have linked an install video near the bottom of the page for our etrailer Trailer Hitch Receiver #e23ZR being…

view full answer...