Utility Trailer Winch Mounting Options
Question:
I want to mount the drawtite 2000 lb winch to a steel trailer. The bed is wood and it pulled right out of it.
asked by: Paul
Expert Reply:
You would not be able to mount a winch to a wood bed if you are going to put any kind of load on it. You would need to get the winch mounted to the steel frame somehow. To do this you can use U bolts to attach through the wood bed to the trailer frame, if there is steel frame below the bed. Otherwise, you will want to fabricate a mounting location for your trailer.
Since you were looking at the Bulldog Trailer Hitch Winch Plate, part # BDW20011, you could purchase a Hitch Receiver tube and have it welded to the trailer frame like part # E-9. With a piece like this welded to the frame, you could use the Winch Plate mount to attach your winch. This option would also allow you to easily remove the winch and keep it out of the weather when not in use. A winch wiring kit with quick disconnects like # SW1520 would work well.
I have included a link to all our winch mounts and another with some receiver fabrication pieces.
Products Referenced in This Question
Combo Bar 6" with 2" Trailer Hitch Receiver - Unpainted
- Hitch Fabrication Parts
- Receiver Tube
- 6 Inch Long
- Raw Finish
- Fits 2 Inch Hitch
- CURT
more information >
Product Page this Question was Asked From
Bulldog Winch Hitch Mounted Winch Mounting Plate with Handles - 2" x 2" Hitch
- Accessories and Parts
- Electric Winch
- Mounting Hardware
- Plates
- With Handle
- Bulldog Winch
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: winch mounts for trailer
- Shop: Dutton-Lainson Hand Winch - Worm Gear - Hex Drive - 2,000 lbs
- Search Results: trailer winch
- Shop: Demco Hydraulic Brake Actuator w/ Electric Lockout - Disc - Zinc - 2" Ball - 7,000 lbs
- Shop: Dutton-Lainson Hand Winch - Worm Gear - Hex Drive - 2,000 lbs
- Shop: Hand Winch Strap with Safety Hook, 2" Wide x 20' Long - 4,000 lbs.
- Shop: HitchGrip Carrying Tool for Weight Distribution Head Assembly with 2-5/16" Ball
- Video: Dutton-Lainson Trailer Winch - Brake Hand Winch - DL11004 Review
- Shop: Roadmaster Dual Hitch Receiver Adapter, 2" or 10" Drop/Rise
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Hand Winches
- Shop: Dutton-Lainson Angle Mounting Plate for StrongArm Electric Winches
- Video: Bearing Repacking and Grease Seals Installation
- Video: etrailer Electric Trailer Brake Kit Installation
- Search Results: hand winch mount
- Video: Roadmaster Dual Hitch Receiver Adapter Review
- Q&A: How to Determine the Amperage on the 12 Volt Power Circuit in a Trailer Connector
- Q&A: Can Badlands 2500 Winch be Wired to 110 AC Power Source
- Q&A: How to Select Trailer Tires with Correct Load Range Rating for Trailer Gross Weight
- Video: Dutton-Lainson Trailer Winch DL24110 Review
- Video: Review of etrailer Hitch Alignment - Hitch Pin Alignment Collar - e98942
- Video: Review of Roadmaster Hitch Adapters - Dual Hitch Adapter - RM-077-10
- Shop: Brake Controller
- Search Results: brake shoes
- Article: It's Fun Until It Breaks: Synthetic or Steel Winch Rope
- Search Results: lug nut lock
- Search Results: wheel lock
- Search Results: trimax
- Shop: Front Mount Hitch
- Article: How to Hitch and Lock a Trailer