Where Is The Curt Adapter Rails For 5th Wheel Hitches C88KR Made?

Question

Question:

Country of origin? C88KR

asked by: Douglas L

0

Expert Reply:

The Adapter Rails for Curt 5th Wheel Hitch - Ford and Chevy/GMC Towing Prep Package # C88KR you were looking at is made in the USA.

I included a video of the # C88KR for you to take a look at.

expert reply by: Samuel C

0

Answer 1

Thank you so much for the pictures and congrats on the new truck! Yes, the Adapter Rails for Curt 5th Wheel Hitch item #C88KR will fit your 2022 Chevy Silverado 2500's factory puck system. These rails have a 25,000 lbs capacity so they should…

view full answer...

Answer 2

The best way to tow a 5th wheel trailer with the gooseneck ball in your 2019 Ford F-350 is with the Demco Recon Gooseneck-to-5th Wheel Trailer Hitch Adapter #DM8550045. This is a 5th wheel hitch that attaches directly to your truck's gooseneck…

view full answer...

Answer 3

The measurements between the front and rear holes on the Adapter Rails for Curt 5th Wheel Hitch #C88KR are 20 1/2" center on center, and 29" center on center. These holes are spaced for the industry standard 5th wheel mounting holes.

view full answer...

Answer 4

The Curt 16027 OEM puck system rail adapter which we offer as part #C88KR would add 2-1/2 inches to the installed height of your 5th wheel hitch. From what I read online, the top of the PullRite 2900 sits 18-1/2 inches tall so using the #C88KR would…

view full answer...

Answer 5

The Curt 16027 which we offer as part #C88KR adapter provides industry standard bed rails that are compatible with Reese, Curt, Demco, B&W, Valley and Husky 5th wheel hitches, among others.

view full answer...

Answer 6

Unless GM changes the pattern of the puck system, the Adapter Rails for Curt 5th Wheel Hitch item #C88KR will still fit the 2024 GM trucks with the OEM puck system. I have no way of knowing if the puck system is changing next year.

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the "new…

view full answer...

Answer 10

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

Hey David, from previous customers of ours who have the same 2020 Keystone Raptor 424 we have determined that your pin box style is the Lippert 1621 which means for a Gen-Y gooseneck adapter you'd want the #GY58GR that you referenced.

view full answer...

Where Is The Curt Adapter Rails For 5th Wheel Hitches C88KR Made?

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching