Correct Replacement for Kwikee Step Controller 909506000

Question

Question:

I have a Kwikee step series 32. The control unit, part number 909506000 seems to have failed. The motor still works when given power. I think it was made it 1999, serial number 0619390. Is LC379146 the correct replacement? Or what is the correct replacement?

asked by: Corey M

0

Expert Reply:

The correct replacement for the Kwikee Step Controller 909506000 is the Replacement Control Unit for Kwikee Electric RV Steps part # LC379606.

expert reply by: Conner L

0

Answer 1

In most cases I've seen, the control module is the likely suspect when the steps start functioning intermittently. The correct replacement module for your 909506000 is part #LC379606. We have confirmed this with Lippert on a few different…

view full answer...

Answer 2

The part number for your Kwikee steps' control board is going to be 90950600 and the correct replacement part from Lippert for that control board is the #LC379606. If you also need the motor or gear box and linkage, those parts are also available…

view full answer...

Answer 3

You actually can replace the control unit on your pre-2006 Kwikee steps with the Lippert Components (LCI) Kwikee pre-IMGL/9510 Step Control with 5323 and 5327 Switches for Motorized Motorhome Entry Steps #LC379606, which is designed for use with the…

view full answer...

Answer 4

Since you can get the motor to work, and the steps are not opening/closing properly then it does sounds like the control module could be the issue. We do carry the correct replacement control module for your 909506000 Kwikee control module. -…

view full answer...

Answer 5

The only control module that you can use to replace your 909513 controller on your 1997 Winnebago Adventurer is the Lippert Components Kwikee Control Unit #LC379606. Just as the other answer page stated, since your steps are older this may not allow…

view full answer...

Answer 6

The correct part may be the solution. The Replacement Control Module for Lippert Electric Coach Step #LC301702 you asked from is not a Kwikee Step controller. The Lippert Components Kwikee Control Unit for pre-IMGL/9510 Step Control with switches…

view full answer...

Answer 7

Part #909506000 has been discontinued by the manufacturer. I reached out to Lippert and got some further information. If your RV step is pre-February of 1999, there unfortunately are not replacement parts available and you'd need to replace the…

view full answer...

Answer 8

The Kwikee Control Box 909506000 has been discontinued by the manufacturer. If your steps were manufactured prior to February of 1999 then there are no replacement parts available and you'd need to replace the entire step. If it is between…

view full answer...

Answer 9

The Kwikee Control Box #909506000 has been discontinued by the manufacturer. Unfortunately, if your steps were manufactured prior to February of 1999, then there are not replacement parts available and you'd need to replace the entire step. If it…

view full answer...

Answer 10

The Kwikee Control Box #909506000 has been discontinued by the manufacturer. The replacement part is determined by the date of manufacture which you can determine by looking at the current part which will have a date on it. If not, you can supply the…

view full answer...

Answer 11

We have the correct controller but the Kwikee Step Control Step with Override Control Panel #LC381020 would not be the correct controller for you. The correct replacement controller for your 909510000 is the Replacement Control Unit for Kwikee…

view full answer...

Answer 12

I spoke with my contact at Lippert regarding your older Kwikee step assembly with the 909506000 control module. He stated that in order to replace the control unit all you need is the part #LC379606. This is designed for pre-IMGL step units like…

view full answer...

Correct Replacement for Kwikee Step Controller 909506000

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching