Correct Air Bags for a 2021 Jeep Gladiator

Question

Question:

Hi, Can you tell me how big these air bags are? I measure about 14in inside the spring at rest. I asked the folks at truckspring.com and they say the firestone kit they have - W23-760 - 4148 is about 11 inches. That doesnt seem right. Is your set the same kit? or is it bigger? How do I know I have the right size? I am guessing they need to fill the whole area - about 14in to support he weight. I am confused - please help. Thanks

asked by: Chris D

0

Expert Reply:

The Firestone Coil-Rite Air Helper Springs part # F29ZR are a fit for a 2021 Jeep Gladiator. They install inside the airbags and then expand when pressure is added. Therefore, the dimensions change when pressure is added so I'm not sure measuring would be helpful. If you have stock coil springs they are a confirmed fit.

That said, the spring is roughly 11" tall x 5" diameter.

expert reply by: Conner L

0

Answer 1

I would be happy to help you and I have a great set of helper springs for your 2022 Jeep Gladiator. I recommend the SumoSprings Solo Custom Helper Springs item #SS42XR. These SumoSprings have a 1,400 lbs capacity. They will keep your vehicle level…

view full answer...

Answer 2

Choosing the correct rear suspension enhancement for your 2022 Jeep Gladiator will depend on how much sag you are actually getting and if you want to have something that is adjustable or not. The SumoSprings Solo Custom Helper Springs #SS62XR will be…

view full answer...

Answer 3

I have another option for you, but the Timbren Active Off-Road Bumpstops - Rear Suspension - 3,000 lbs #T86FR you were looking at for your 2020 Jeep Gladiator is not designed to prevent sag from towing a trailer, but instead is designed to give you…

view full answer...

Answer 4

That is correct. If your 2021 Wrangler Unlimited has the connector located under the dash to the left of the steering column near the top of the e-brake pedal as shown in the provided photo, you'd use the #3073-P harness to connect the #90195…

view full answer...

Answer 5

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 6

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 7

What you're going to need is two of the transfer switches in that case. I have attached a diagram from Furrion that shows you how you're going to need to hook the two transfer switches #F30ATS up: -one to the other, then one branching off to…

view full answer...

Answer 8

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 9

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Answer 10

That spindle looks pretty well destroyed so best option is going to be to replace the axle. You are going to need to measure your current axles in a few places to get the correct one as we don't have access to what your numbers reference. You…

view full answer...

Answer 11

A cover being installed on your spare tire would not prevent the Swagman Bike Rack part #S80501 from installing. The rack would still fit and work well. You might still compare the dimensions in the picture I attached with you spare tire so that you…

view full answer...

Answer 12

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Correct Air Bags for a 2021 Jeep Gladiator

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching