Trailer Hitch for the 2018 BMW X5 with Back Up Sensors

Question

Question:

Under specs, says for use for vehicles without backup sensor. What product is suggested when a backup sensor is used.

asked by: Ralph

0

Expert Reply:

The EcoHitch Stealth Trailer Hitch Receiver that is designed to fit the 2018 BMW X5 is # EH44FR. This hitch very similar to # 306-X7265 accept it is designed to fit the model with the rear parking sensors.

If you need trailer wiring for your vehicle, I recommend # C56190KIT.

expert reply by: Jacob H

0

Answer 1

For the money, the best option for your 2018 BMW X5 non-M with backup sensors is the EcoHitch Stealth Trailer Hitch Receiver #EH44FR. The Stealth Hitches Hidden Trailer Hitch Receiver with Towing Kit #SH85VR is a fantastic hitch and even comes with…

view full answer...

Answer 2

You have a lot of options with us. Using the fitguide will let you know which hitches will work regardless of if it's the 8cyl or 6cyl M body. For your 2013 BMW X5 M Body you can choose from one of these Class III hitch options. First up, with a…

view full answer...

Answer 3

I have a solution for you, but the EcoHitch #EH44FR is designed to fit on the 2018 BMW X5 and not the X6 For the 2018 BMW X6 you'll want to use the Curt #13077, which also has a concealed cross tube design like the EcoHitch. If you're going…

view full answer...

Answer 4

From what you described you're either looking for the EcoHitch #EH44FR which doesn't require fascia trimming but it does replace the OEM impact structure behind the bumper, or the Draw-Tite #75600 which is the only hitch that lets you…

view full answer...

Answer 5

There are two EcoHitch Stealth Trailer Hitch Receivers for a 2015 BMW X5, part #306-X7265 if you don't have reverse sensors or part #EH44FR if you do have reverse sensors. Therefore, it looks like you need the latter of the two options. I have…

view full answer...

Answer 6

For your 2017 BMW X5 we do have trailer lighting harnesses like the Curt part #C56190KIT which plugs into the vehicle taillight harnesses for an easy install.

view full answer...

Answer 7

We have a version of the EcoHitch that fits your 2016 BMW X5 that was designed for versions of the vehicle that have the backup sensors with part #EH44FR. This would be your best option and gives you ability to remove lower hitch opening when not…

view full answer...

Answer 8

I looked up some pictures of your 2021 Winnebago Micro Minnie 1808 FBS and it has an Alumi-Tread pull out step so for a three step version you'd need the part #LC432696 and you'd be set.

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for your…

view full answer...

Answer 12

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106 will…

view full answer...

Trailer Hitch for the 2018 BMW X5 with Back Up Sensors

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching