Crossbar Length Needed for 2 Thule Hullavators Mounted on Roof Rack of 2021 Kia Telluride

Question

Question:

I want to install two Hullivators which I already have on a 2021 Kia Telluride. Can you tell me if I need the 53inch cross bars or the 60inch cross bars?

asked by: Timothy M

0

Expert Reply:

The Thule Hullavator # TH898 requires at least 28" of crossbar space and 4"-8" outside of the side rails; so to use 2 Hullavators you're going to need at least 60" crossbars.

For a complete roof rack system that works with the Hullavator I recommend using the Thule Roof Rack System for 2021 Kia Telluride that uses parts # TH710601 and # TH77JV for the fit kit and towers on raised side rails. These parts are compatible with the Thule Wing Bar Evo # TH711500 (silver) or # TH711520 (black), which will also work with the Hullavator and are 60" long bars. Using the # TH710601, # TH77JV and one of those sets of bars will give you a nice, durable and good looking roof rack for your Telluride.

I've linked a review video of these bars for you to check out.

expert reply by: Erik B

0

Answer 1

There is not a general restriction from Thule that says two Hullavator Kayak Carriers #TH898 can't be used on a Thule roof rack. As long as the crossbars on your Ford Escape have the required length for two sets and a sufficient weight capacity…

view full answer...

Answer 2

The correct crossbar size for a Rhino-Rack roof rack on your 2022 Kia Telluride are the 54 inch bars like you mentioned, the Rhino-Rack Vortex Aero Crossbars - Silver #RRVA137S-2 or Black #RRVA137B-2. That said, I think it's possible the 49 inch…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 5

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Answer 6

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

There are a couple of differences between the two. The JetStream bars like #Y00425 are made of extruded aluminum while the CoreBars such as the #Y00421 you've looked at are constructed of galvanized steel. As you've mentioned, the CoreBar has…

view full answer...

Answer 9

Hey Alec, For your 2016 Ford Fusion I recommend the recommend a roof rack from Inno: Inno Aero Crossbars #INXB138-145 Inno Through Feet for Aero Crossbars #INXS250 Custom Fit Kit for Inno XS200, XS250, and INSU-K5 Roof Rack Feet #INK860 As with any…

view full answer...

Answer 10

I'll start off with the ski rack for your 2024 Jeep Grand Cherokee Laredo since that is fairly simple. I recommend the Rhino-Rack Ski and Snowboard Carrier #RR574. This is capable of holding 4 pairs of skis, has an aluminum construction for…

view full answer...

Answer 11

To add a roof rack to your 2022 Dodge Durango with no rails, I recommend the roof rack by Yakima which includes the following parts: Yakima BaseLine FX Roof Rack for Naked Roofs - Aero Crossbars - Black - Qty 2 item #Y39UV BaseClip Fit Kit for Yakima…

view full answer...

Answer 12

Thanks for all the details! We definitely have a way to get a cargo basket and an awning installed on your 2024 Toyota Highlander, although the aftermarket roof rack systems will use a clamping system with your door jambs instead of mounting via…

view full answer...

Crossbar Length Needed for 2 Thule Hullavators Mounted on Roof Rack of 2021 Kia Telluride

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching