Demco Channel Tounge Coupler Length

Question

Question:

I need to know the length overall on this part Demco Channel Tongue Trailer Coupler - Zinc - 2-5/16inch Ball - 3inch Channel - Bolt On - 21K

asked by: Matthew G

0

Expert Reply:

According to Demco the Channel Tongue Trailer Coupler # DM15931-95 is 13.7" long.

Don't forget a etrailer Brake Coupler Lock # e98888. As this coupler has an oversized latch to make unlatching easier but does require a special size lock to keep your trailer secured.

expert reply by: Bud M

0

Answer 1

The only difference in the Demco Channel Tongue Trailer Couplers #DM16080-95 and #DM15931-95 is going to be the bolt pattern. One will have the 5-Bolt hole pattern and the other is going to have 4-Bolt holes. I have included images below showing…

view full answer...

Answer 2

Since the mounting holes of the Demco Coupler part #DM15931-52 are 1/2 inch in diameter you'd want to source 1/2 inch diameter bolts Grade 5 or higher. Go with bolts and nuts long enough to fit through coupler.

view full answer...

Answer 3

For replacing your Titan Model 6 #T4747220 I recommend the Demco Channel Tongue Trailer Coupler #DM15931-95. They will share the same 3" and 2" bolt bolt hole separation that you are currently using on your trailer. You will need a…

view full answer...

Answer 4

The Trimax Puck Lock for Trailer Door Hasps #TMX96RR cannot be keyed alike. While disappointing I'm sure, there is another option to consider, which is to order a quantity of two of the Trimax Puck Locks for Trailer Door Hasps #TMX73FR. The…

view full answer...

Answer 5

Thank you for the image. It appears you will need either the Demco Channel Tongue Trailer Coupler #DM13203-95 or #DM16080-95. Both of these couplers have a zinc coating for increased corrosion resistance and fit on a standard 3" wide channel…

view full answer...

Answer 6

The Dexter Electric Trailer Brake Kit #23-105-106 are a replacement set for the 023-358-00. This kit includes a right and left brake assembly that is manually adjustable. I recommend the Dexter Nev-R-Adjust Electric Trailer Brake Kit #23-458-459 as…

view full answer...

Answer 7

I spoke to my contact at Way Interglobal about the Everchill Refrigerator part #324-000119. They informed me that upon startup and until the set temperature is reached, the unit will draw 8-9 amps. Once the set temperature is reached, it will draw…

view full answer...

Answer 8

We have a folding trailer tongue hinge that could work for the purpose you describe, as long as your trailer frame isn't constructed of aluminum. You could use the Fulton Fold Away Coupler Hinge, part #FHDPW330300. The hinge kit is designed for 3…

view full answer...

Answer 9

A brake actuator with a manual lockout, like part #T63FR, will have a lockout lever on the actuator that prevents the internal spring and shock from engaging the master cylinder when backing up (see photo). A no lockout brake actuator, like part…

view full answer...

Answer 10

I can certainly help you out with a disc brake set up on your trailer. The first thing we need to find out in order to select the correct parts would be the inner and outer bearing numbers stamped into the sides of the bearings in the hubs you have…

view full answer...

Answer 11

The best braking system for towing a trailer that has brakes would be an Electric-Over-Hydraulic (EOH) system like what you are referencing. I do have a solution for you, but we do not have any of the products that you mentioned. Hydraulic disc…

view full answer...

Demco Channel Tounge Coupler Length

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching