Can Thule Hullaport XT Attach to Top of Rhino Rack Pioneer Platform Tray

Question

Question:

Hello, I am looking to purchase the pioneer platform from rhino rack for my 2014 JKU. I am wondering if I would be able to use the the Thule Hull-a-port XT if I added rhino racks accessory bar that runs horizontal on the rack.

asked by: Nick A

1

Helpful Expert Reply:

There's actually an adapter for the Thule Hullaport XT part # TH849000 that would allow it to fit into the channels on top of the Rhino Rack Pioneer Platform for your 2014 Jeep Wrangler Unlimited part numbers # RR42108BF, # RRRLT600-3, # RRRJKB1, and # RRPLHS4.

expert reply by: Jameson C

1

Answer 1

The Rhino-Rack Universal Pioneer Platform Rack, part #RR42115BF, is designed to mount to your crossbars with the three included mounting pieces. These pieces are meant to be attached to the rack and crossbars along the two outer slots. The rack can…

view full answer...

Answer 2

Yes, the Rhino-Rack Nautic 580 #RR580 will mount to a Rhino-Rack Pioneer Platform like the #RR42111BF , but it won't mount into the channels. Instead you will need the 24" Accessory Bars #RR43232B that run across the platform, since the…

view full answer...

Answer 3

Yes the Thule Hull-A-Port part #TH849000 that you referenced will fit in the top channels of a Rhino Rack Vortex Aero bar like the rack that fits your 2010 Ford Fusion part numbers #RRVA126B-2, #RRRLKVA, and #DK149. This would be a really great roof…

view full answer...

Answer 4

Yes, the track/channel dimensions between the Rhino Rack and Yakima roof racks are the same dimensions so the Yakima T-bolts part #Y8880184 that you referenced will fit and work well.

view full answer...

Answer 5

The "C" channel on the Rhino-Rack Vortex Crossbar System for Retrax XR Series and Mountain Top EVO-M Tonneau Covers #RRVA180B-RRRLT600 is essentially the same thing as the T-slots you see from other manufactures, it is just what Rhino-Rack…

view full answer...

Answer 6

The Hullavator Pro part #TH898 that you referenced requires a set of aftermarket crossbars with a bit of overhang to install. So for your 2018 Subaru Outback Wagon you'd need to install an aftermarket roof rack. For that you'd want the Thule…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Answer 10

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 11

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 12

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...