2 Trailer Hitch Receiver For A 2021 Nissan Rogue

Question

Question:

Hello, I have a Nissan Rogue 2021 SV I would like to know if the product #76177 it will fit at my SUV, or let me know if you have one that fit. Thanks

asked by: Horacio C

0

Expert Reply:

The 2" receiver you want for your 2021 Nissan Rogue is Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C24HR. It has a max tongue weight rating of 525lbs and max towing capacity of 3,500lbs. This offers a simple bolt-on installation process and requires no drilling or welding. All necessary hardware and instructions are included.

The hitch you were looking at is NOT a fit for your vehicle.

expert reply by: Andrew N

0

Answer 1

When comparing the Curt #C24HR, etrailer #e93ZR, and Draw-Tite #DT85MR there are very few differences. All three hitches have a 2" receiver and the same maximum gross towing weight of 3,500 lbs and tongue weight of 525 lbs. The Curt and etrailer…

view full answer...

Answer 2

We offer the Draw-Tite #DT85MR, the etrailer brand #e93ZR and the Curt #C24HR Class III hitches, all of which will fit your 2021 Nissan Rogue. All three hitches have identical towing/tongue weight capacities of 3500/525 lbs. The Curt and the etrailer…

view full answer...

Answer 3

For your 2022 Nissan Rogue you are going to want the Draw-Tite Max-Frame Trailer Hitch Receiver item #DT85MR. This hitch is custom fit and bolts directly to your Nissan's frame with included hardware. If you are need of a wiring harness to…

view full answer...

Answer 4

That hitch does stick out pretty far on your 2021 Nissan Rogue! I can certainly understand wanting something a bit more recessed. We have the Curt hitch #C24HR which is much more recessed like you can see in the picture I attached. I could be wrong…

view full answer...

Answer 5

The Draw-Tite #DT85MR and etrailer.com #e93ZR Class III hitches will be evenly matched in weight capacities for your 2021 Nissan Rogue, so we can disregard the capacities for this comparison. Especially since your Rogue can tow, when properly…

view full answer...

Answer 6

When installing the Curt Hitch part #C24HR on your 2021 Nissan Rogue you do no need to cut the bumper in any way or do any drilling.

view full answer...

Answer 7

The trailer hitch I recommend for a 2021 Nissan Rogue is the Draw-Tite Max-Frame Trailer Hitch Receiver part #DT85MR which is a great bolt-on option with no cutting or drilling required. It will be great for towing or hitch mounted accessories like…

view full answer...

Answer 8

The Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" #DT23MR is confirmed to fit all 2021 Nissan Rogue models, including your SV. Unless you specifically want a 1-1/4" hitch, I recommend the #DT85MR Draw-Tite Max-Frame…

view full answer...

Answer 9

Yes, the Curt Trailer Hitch Receiver part #C24HR is a confirmed fit for a 2021 Nissan Rogue (All Models). It features a 2" receiver opening with class III rating. It also has a hidden design meaning the crosstube is hidden behind the bumper…

view full answer...

Answer 10

The Class III hitches we have for your 2022 Nissan Rogue include the Draw-Tite #DT85MR and the Curt #C24HR. I recommend going with the Draw-Tite over the Curt because it sits about 1/2" higher off the ground and the center of the hitch pin hole…

view full answer...

Answer 11

The inside to inside flange to flange distance of the #DT85MR Draw-Tite Class III hitch is 44 inches. Each mounting flange has 3 holes, the center hole is 2.87 inches from the mounting hole closest to the receiver tube, and the center hole and the…

view full answer...

Answer 12

Yes. The Curt #C57HR will fit on your 2021 Nissan Rogue Platinum, but the downside is that it's only got a 1-1/4" receiver which isn't really a great option unless you already have a bike rack for a 1-1/4" hitch. If you don't…

view full answer...

2 Trailer Hitch Receiver For A 2021 Nissan Rogue

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching