Replacement Hardware for Mounting Curt A25 5th Wheel Hitch to Leg Kit

Question

Question:

I have a Curt a25 Fifth wheel hitch and am needing 4 screws and nuts to attach the legs to the head unit. I saw Item # C16125-SK4 on your website but didnt see any nuts with it so didnt know if that was the right item to purchase. Any assistance would be greatly appreciated. Thank you.

asked by: Michael P

0

Expert Reply:

According to my contact at Curt, the # C16125-SK4 is indeed the correct hardware you're needing. The center section of the hitch is threaded, so no nuts are necessary.

expert reply by: Mike L

0

Answer 1

Welcome back! Happy to hear you're satisfied with your A16 hitch. To convert it over to fit in the Chevy puck system you will need the Curt OEM 5th Wheel Hitch Legs for Chevy/GMC Towing Prep Package item #CU53FR. This will make your A16 the Curt…

view full answer...

Answer 2

The Curt A16 fifth wheel hitch that fits directly to the OEM rail kit of your 2024 GMC Sierra 2500 is the part #C74FR which means that for just the leg kit you'd need the #CU53FR.

view full answer...

Answer 3

To convert your Curt A16 hitch to fit directly to the OEM rail kit of your 2021 GMC Sierra 3500 all you need is the leg kit part #CU53FR and you'd be set.

view full answer...

Answer 4

For replacement rails only, I suggest the Husky Universal Base Rails for 5th Wheel Trailer Hitches #HT30686. These base rails provide the attachment points for mounting your fifth-wheel trailer hitch in your truck bed and compatible with Curt,…

view full answer...

Answer 5

Yes, you can remove the Legs #C16904 from your Curt Q20 5th Wheel Hitch #C16130. Then you will be able to bolt the Head #C16530 to the Curt R20 Round Tube Slider #C16550. I recommend using new Hardware #C16125-SK4 when you move the head to the new…

view full answer...

Answer 6

Yes the Curt fifth wheel leg kit part #CU53FR that you referenced does fit your 2021 GMC Sierra 3500 OEM rail kit and also fits the Curt A16 fifth wheel hitch head you have as well. This would essentially give you a #C74FR.

view full answer...

Answer 7

The Replacement Hardware for Curt A Series and Q Series 5th Wheel Hitches #C16125-SK4 contains 4 new bolts, flat washers and lock washers for your Curt A16 5th Wheel Trailer Hitch #C16120 to a set of fixed legs. We also have the Replacement Head…

view full answer...

Answer 8

The correct replacement hardware you are looking for is Replacement Hardware for Curt A Series and Q Series 5th Wheel Hitches #C16125-SK4. This will secure the Replacement Head Unit for Curt Q24 5th Wheel Trailer Hitch - 24,000 lbs #C16545 to the 5th…

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Replacement Hardware for Mounting Curt A25 5th Wheel Hitch to Leg Kit

Product Page this Question was Asked From

Continue Researching