Leg Kit to Adapt Curt A16 Fifth Wheel Hitch to 2021 GMC Sierra 3500 with OEM Rail Kit

Question

Question:

I have a 2021 GMC 3500 Sierra short bed and A16 curt. Will this fit on the short bed?

asked by: Clint

0

Expert Reply:

Yes the Curt fifth wheel leg kit part # CU53FR that you referenced does fit your 2021 GMC Sierra 3500 OEM rail kit and also fits the Curt A16 fifth wheel hitch head you have as well. This would essentially give you a # C74FR.

expert reply by: Jameson C

0

Answer 1

Hey Don, yes you can swap the leg kit of your current Curt Q25 to fit the OEM rails of your new 2024 Chevy Silverado 3500. For that all you would need is the part #CU53FR.

view full answer...

Answer 2

If you were to purchase the Curt #C16540 A20 5th wheel hitch head/center section plus the #C16024 legs for the 2020 GM fifth wheel prep package, you would indeed have a complete hitch with everything necessary included. If you wanted to install a…

view full answer...

Answer 3

Welcome back! Happy to hear you're satisfied with your A16 hitch. To convert it over to fit in the Chevy puck system you will need the Curt OEM 5th Wheel Hitch Legs for Chevy/GMC Towing Prep Package item #CU53FR. This will make your A16 the…

view full answer...

Answer 4

The Curt A16 fifth wheel hitch that fits directly to the OEM rail kit of your 2024 GMC Sierra 2500 is the part #C74FR which means that for just the leg kit you'd need the #CU53FR.

view full answer...

Answer 5

The Replacement Hardware for Curt A Series and Q Series 5th Wheel Hitches #C16125-SK4 contains 4 new bolts, flat washers and lock washers for your Curt A16 5th Wheel Trailer Hitch #C16120 to a set of fixed legs. We also have the Replacement Head…

view full answer...

Answer 6

To convert your Curt A16 hitch to fit directly to the OEM rail kit of your 2021 GMC Sierra 3500 all you need is the leg kit part #CU53FR and you'd be set.

view full answer...

Answer 7

For replacement rails only, I suggest the Husky Universal Base Rails for 5th Wheel Trailer Hitches #HT30686. These base rails provide the attachment points for mounting your fifth-wheel trailer hitch in your truck bed and compatible with Curt,…

view full answer...

Answer 8

According to my contact at Curt, the #C16125-SK4 is indeed the correct hardware you're needing. The center section of the hitch is threaded, so no nuts are necessary.

view full answer...

Answer 9

Yes, you can remove the Legs #C16904 from your Curt Q20 5th Wheel Hitch #C16130. Then you will be able to bolt the Head #C16530 to the Curt R20 Round Tube Slider #C16550. I recommend using new Hardware #C16125-SK4 when you move the head to the new…

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion…

view full answer...

Answer 12

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from…

view full answer...

Leg Kit to Adapt Curt A16 Fifth Wheel Hitch to 2021 GMC Sierra 3500 with OEM Rail Kit

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching