Spare Tire Carrier that Carries Multiple Bolt Patterns

Question

Question:

On your web site says it it is an 8 lug spare tire holder but then it says fits 4 or 5 lug does that mean it only fits 4 or 5 lug or also fits 8 lug

asked by: Heber F

0

Expert Reply:

We have many spare tire carriers that are designed to carry various sizes of spare tires. We have # UF15-954730 and # TR-1 that are both designed to fit 5, 6, and 8 bolt patterns.

expert reply by: Jacob H

0

Answer 1

The bumper mounted spare tire carriers like the part #UF15-954730 are designed to fit 4 inch by 4 inch square bumpers that are continuously welded. Check out the picture I attached that shows this carrier mounted to the style of bumper it is…

view full answer...

Answer 2

As long as the rear bumper of your 2014 Thor Chateau Motorcoach has a 4 inch by 4 inch bumper that is confirmed to be able to carry weight the Ultra-Fab Folding Spare Tire Carrier #UF15-954730 would work well for you. I did a little research and it…

view full answer...

Answer 3

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and…

view full answer...

Answer 4

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 5

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 6

I have a solution for you, but we do not carry Glo-Brite lights, so replacing it with the same brand will not be something I can offer you. Instead, to replace your Glo-Brite 9852-88, I recommend using the Optronics LED Trailer Tail Light #STL72RB.…

view full answer...

Answer 7

What you're going to need is two of the transfer switches in that case. I have attached a diagram from Furrion that shows you how you're going to need to hook the two transfer switches #F30ATS up: -one to the other, then one branching off to…

view full answer...

Answer 8

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 9

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Answer 10

When installing/adjusting the Solera RV Slide-Out Awning #LCV000163285 tension is applied by rotating the awning roller 14 times. This should apply the needed spring tension so that the fabric doesn't billow in the wind or leave enough slack that…

view full answer...

Answer 11

The best option we offer for your dump trailer is the Erickson Mesh Tarp and Truck Bed Cover part #EM57059 which measures 12' wide x 16' long. It's not the exact dimensions you wanted but it will still cover most of the area you need it…

view full answer...

Answer 12

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Spare Tire Carrier that Carries Multiple Bolt Patterns

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching