Replacement Hardware Kit for Westin 3 inch Bars 2004 Dodge Ram 3500

Question

Question:

2004 Dodge ram 3500 Quad cab I have 3 Westen nerf bars and i am wondering what installation hardware kit I need to buy. I got the bars for free but they didnt have any of the installation hardware. 2004 Dodge ram 3500 Quad cab. thank you

asked by: Jon P

0

Expert Reply:

The correct replacement hardware for a 2004 Dodge Ram 3500 quad cab would be the part # 23-231PK but this will only work with bars that were originally designed as a fit for your truck. You aren't able to adapt bars from a different truck by just swapping hardware kits.

expert reply by: Jameson C

0

Answer 1

The two hardware kits fit similar Dodge trucks but the big difference is the style of cab that both trucks fit. The #23-232PK is for regular cab trucks like the following: 2002 - 2002 Dodge Ram Pickup 1500 - Regular Cab 2009 - 2009 Dodge Ram Pickup…

view full answer...

Answer 2

The Nerf Bars that install with the hardware you referenced do attach to the frame, as you can see by the accompanying cut out of the instructions that I added. It is important to note that the Replacement Mounting Brackets and Hardware for Westin…

view full answer...

Answer 3

I have a solution for you, but the #23-232PK are designed for the Westin #23-2320 and #23-2325 bars. I spoke with Westin and they confirmed that #23-231PK is the correct installation hardware kit for your Platinum Series bars to fit on your 2007 Ram…

view full answer...

Answer 4

I spoke with my Westin rep, and was told that the correct hardware/bracket kit for your older 3 inch Platinum nerf bars for a 2003 Dodge Ram 3500 quad cab is part #23-231PK.

view full answer...

Answer 5

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Answer 6

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 7

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 8

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 9

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 10

The length of wire desired depends on your vehicle connection and your personal preference. You want enough slack for turning, but not so much for dragging as you mentioned. A little extra slack isn't a problem and not enough could lead to stress…

view full answer...

Answer 11

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 12

We have a really great kit that comes with everything you'd need to convert your 2021 Vanleigh Pinecrest 335RLP from tandem 6k drum brakes to electric over hydraulic disc brakes with the HydraStar Disc Brake Kit w/ Actuator for Triple Axle…

view full answer...

Replacement Hardware Kit for Westin 3 inch Bars 2004 Dodge Ram 3500

Product Page this Question was Asked From

Continue Researching