Correct Steering Stabilizer and SumoSprings for a 2021 Jayco Redhawk  

We do have the steering stabilizer as well as front and rear anti-sway bars for your 2018 Forest River Sunseeker 3170DS, which was built on a Ford E450 chassis. I confirmed these fits with Roadmaster for you; the correct parts are: - Roadmaster…

For driving and handling upgrades to a 2021 E350 Class-C, RV, I would recommend the following. Roadmaster #RM-RBK24-RSSC, Reflex Steering Stabilizer w/ mounting brackets. Compensates for over steering and returns your vehicle to center. Roadmaster…

I have some great options to help improve the steering and stability for a 2021 Thor Freedom Elite 22FE (Ford E-Series Chassis). In order to improve the steering I recommend installing the Roadmaster Reflex Steering Stabilizer part #RM-RBK24-RSSC…

For your class C motorhome on a Ford E-450 chassis I recommend using the Roadmaster Reflex Steering Stabilizer part #RM-RBK24-RSSC. The stabilizer attaches to the motorhome's steering mechanism and works to help you maintain control of your…

For your 2022 Thor Axis 24.1 Class A built on a Ford E-350 chassis we have front and rear sway bars with the part #RM-1139-176 for the front bar and part #RM-1139-147 for the rear bar and you'd be set.

It sounds like you're looking to stabilize your 2022 motorhome on a Ford E-350 chassis. We definitely have parts you can use for this application but we don't have any Panhard or Trac Bar products specifically. For stabilization help…

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on…

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and…

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

The best option we offer for your dump trailer is the Erickson Mesh Tarp and Truck Bed Cover part #EM57059 which measures 12' wide x 16' long. It's not the exact dimensions you wanted but it will still cover most of the area you need it…

What you're going to need is two of the transfer switches in that case. I have attached a diagram from Furrion that shows you how you're going to need to hook the two transfer switches #F30ATS up: -one to the other, then one branching off to…

That spindle looks pretty well destroyed so best option is going to be to replace the axle. You are going to need to measure your current axles in a few places to get the correct one as we don't have access to what your numbers reference. You…