Can the Bauer BA64FR Be Mounted Both Left Hand and Right Hand Orientation

Question

Question:

Is Bauer Motorhome Door Lock part number BA64FR available in left hand and right hand? Thanks.

asked by: George D

0

Expert Reply:

I do have a solution for you, but the # BA64FR is not available in a left hand or right hand orientation; it can be used in either manner so it would work in either the right facing or left facing orientation on your coach door. This door handle comes with it's own strike plate to allow you to install it however you need.

expert reply by: Erik B

0

Answer 1

I recommend the Bauer Products Motorhome Door Lock, #BA64FR. This is listed as a replacement for the Trimark 060-0650 and fits doors that are 1-1/4" to 1-1/2" thick with a required cutout of 5-1/4" wide x 4-1/2" tall. For proper…

view full answer...

Answer 2

The Bauer Products Motorhome Door Lock - Black Item #BA64FR has a cut out dimension of 5-1/4" wide x 4-1/2" tall. Looking at your pictures it looks like you have a hole with 4-7/8" width x 4-3/4" height dimensions. You are correct…

view full answer...

Answer 3

The Bauer Products Camper Door Lock - Black Item #BA65FR will fit your 2010 Casita Travel Trailer as long as the cutout hole from your previous door lock measures 5-1/4" wide x 4-1/2" tall and you door is 1-1/4" to 1-1/2" thick.…

view full answer...

Answer 4

I recommend that you first remove the current lock and identify the cutout measurement. I have two optons listed below and which one you need is based on your cutout dimensions. Be aware that entry door locks are not a tight tolerance fit, so the cut…

view full answer...

Answer 5

I spoke with the manufacturer and the Bauer Products Motorhome Door Lock - Black #BA64FR strike plate mounting holes has a 5-1/2" measurement from center to center.

view full answer...

Answer 6

The Bauer Products Motorhome Door Lock #BA64FR is the closest we have to the cutout size you have. This door lock requires a 5-1/4" wide x 4-1/2" tall opening so you will need to widen your opening by 1/2'. This door does have a…

view full answer...

Answer 7

The Bauer Products Motorhome Door Lock part #BA64FR will fit any motorhome or trailer with a latch cutout that is 5-1/4" wide x 4-1/2" tall or can be opened up to such. The door thickness must also be between 1-1/4" to 1-1/2"…

view full answer...

Answer 8

The Bauer Products Motorhome Door Lock #BA64FR and it's sister option #BA65FR are the only options we carry that are close enough to fit your 5" wide by 4-3/4" tall (with minor trimming to get your 5" width to 5-1/4"). The…

view full answer...

Answer 9

The Bauer Products Motorhome Door Lock, #BA64FR is 5-1/2" X 6-7/8".

view full answer...

Answer 10

The Bauer Products Motorhome Door Lock part #BA64FR is designed to be installed inside a 5-1/4" wide x 4-1/2" tall cutout. Therefore, so long as you have this size cutout or are willing to make this size cutout for the lock it will fit.…

view full answer...

Answer 11

The best match we have for a Trimark 0650 Entry Door Latch is the Bauer Products Motorhome Door Lock part #BA64FR which installs into a 5-1/4" wide x 4-1/2" tall opening. You'll need to increase the width of the opening a bit with this…

view full answer...

Answer 12

Manufacturers do not list the door handle locks used so you would need to remove the door handle lock from the entry door of your 2001 R-Vision Trail-Lite M-241 Motorhome and measure the cutout hole to find the size needed. For example the Bauer…

view full answer...

Can the Bauer BA64FR Be Mounted Both Left Hand and Right Hand Orientation

Product Page this Question was Asked From

Continue Researching