How To Confirm Fit of the Bauer Products Motorhome Door Lock BA64FR

Question

Question:

Will this be a direct replacement for the original entrance door lock w/deadbolt for my 2000 Coachmen Leprechaun Class C? Thanks

asked by: Joseph C

0

Expert Reply:

The Bauer Products Motorhome Door Lock part # BA64FR will fit any motorhome or trailer with a latch cutout that is 5-1/4" wide x 4-1/2" tall or can be opened up to such. The door thickness must also be between 1-1/4" to 1-1/2" thick. Therefore, you will need to measure to confirm fit.

Unfortunately, it is not possible for us to confirm fit for you based on the year, make, and model of the RV.

expert reply by: Conner L

0

Answer 1

The Bauer Products Motorhome Door Lock - Black Item #BA64FR has a cut out dimension of 5-1/4" wide x 4-1/2" tall. Looking at your pictures it looks like you have a hole with 4-7/8" width x 4-3/4" height dimensions. You are correct…

view full answer...

Answer 2

Based on your pictures, it appears that you need a right hand door lock. You will need to remove the 4 bolts on the inside of the latch to remove the cover plate and measure the size of the cut out in the door to make a good choice. The Bauer BA76FR…

view full answer...

Answer 3

I do have a solution for you, but the #BA64FR is not available in a left hand or right hand orientation; it can be used in either manner so it would work in either the right facing or left facing orientation on your coach door. This door handle comes…

view full answer...

Answer 4

The Bauer Products Motorhome Door Lock part #BA64FR is designed to be installed inside a 5-1/4" wide x 4-1/2" tall cutout. Therefore, so long as you have this size cutout or are willing to make this size cutout for the lock it will fit.…

view full answer...

Answer 5

I recommend that you first remove the current lock and identify the cutout measurement. I have two optons listed below and which one you need is based on your cutout dimensions. Be aware that entry door locks are not a tight tolerance fit, so the cut…

view full answer...

Answer 6

We have a wide variety of replacement RV door locks like the Bauer Products Motorhome Door Lock #BA64FR. If you can give me some dimensions of the cutout and thickness of the door you will be installing the door lock on I'd be more than happy to…

view full answer...

Answer 7

The RV door latch we offer that fits the biggest cut out is the Bauer part #BA64FR which fits a cutout of 5-1/4 inch by 4-1/2 inch.

view full answer...

Answer 8

The Bauer Products Motorhome Door Lock #BA64FR that you referenced could fit your 2006 Damon Challenger 348F but you would have to open up the cut out dimensions a little bit as this is designed to fit the dimensions of 5-1/4" wide x 4-1/2"…

view full answer...

Answer 9

I contacted Trimark in regards to a replacement part for the Trimark 030-0900. 030-0900 is actually a series number not a specific part number. To find the part number you will need to take the interior handle completely off the unit. On the back…

view full answer...

Answer 10

I spoke with the manufacturer and the Bauer Products Motorhome Door Lock - Black #BA64FR strike plate mounting holes has a 5-1/2" measurement from center to center.

view full answer...

Answer 11

Lock assemblies can be different sizes and still use the same latch cutout sizes. The Global Link RV Entry Door Locking Latch Kit with Keyed Alike Option - White #295-000021 will fit into latch cutouts that are between 2-1/2" wide x 3-1/2"…

view full answer...

Answer 12

The Bauer Products Motorhome Door Lock #BA64FR is the closest we have to the cutout size you have. This door lock requires a 5-1/4" wide x 4-1/2" tall opening so you will need to widen your opening by 1/2'. This door does have a…

view full answer...

How To Confirm Fit of the Bauer Products Motorhome Door Lock BA64FR

Product Page this Question was Asked From

Continue Researching