Does Muffler Need To Be Removed To Install Draw-Tite 24913 On 2017 Toyota Corolla?

Question

Question:

I have spoken to a mechanic and he says the muffler needs to be removed to install Draw-Tite - 2017 Toyota Corolla. Would you please verify that is correct?

asked by: Daniel S

0

Expert Reply:

To install the Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # 24913 on your 2017 Toyota Corolla you will not need to remove or lower the muffler for the installation. The only item that will need to be removed is a plastic trim panel held on by a few plastic rivets and a few 12mm bolts.

I included a video of the # 24913 being installed on a 2017 Toyota Corolla for you to take a look at.

expert reply by: Samuel C

0

Answer 1

For your 2006 Toyota Corolla Sport, I recommend using the Curt Trailer Hitch Receiver part #C11265. This hitch hangs down lower on the vehicle in comparison to the Draw-Tite Sportframe Trailer Hitch Receiver part #24913. As you can see in the…

view full answer...

Answer 2

Yes, Curt trailer hitch #C11265 will fit the 2017 Toyota Corolla. But if you plan on using the hitch for a bike rack or cargo carrier and not towing I recommend Draw-Tite hitch #24913. The reason is that for the Curt hitch Curt requires the use of…

view full answer...

Answer 3

The Kuat Sherpa 2.0 #SH22G and the NV 2.0 #NV22G that you referenced are both excellent platform-style racks that will hold your bikes by the front wheels with no frame contact. These are top-of-the-line carriers and you really would not go wrong…

view full answer...

Answer 4

The Curt Trailer Hitch Receiver part #C11265 is what I recommend for a 2017 Toyota Corolla. It has a 1-1/4" opening for use with hitch mounted accessories like bike racks and cargo carriers. It has a 200 lb tongue weight rating which will be…

view full answer...

Answer 5

We have an 8 foot ramp door spring that has dual torsion springs like you asked about with the part #M394FR. This is the hand wound torsion style spring you mentioned.

view full answer...

Answer 6

I went out to the warehouse with a handful of sockets to see which size fits over Flange Wheel Nut - 5/8" Item #95188. It takes a 1-1/8 inch socket. I have linked a video review of this nut for you.

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...