Availability Of 1-1/2" Wide Aluminum Trim For Trailers

Question

Question:

Im looking for 1.5 Aluminum white flat trim for a 2006 ragen toy hauler.

asked by: Alfredo G

0

Expert Reply:

The closest option we have is the Flat Rub Rail Trim for Enclosed Trailer - 1-1/2" Tall x 1/4" Deep - Aluminum # 36286-955 which is 1-1/2" wide, but is not white. The # 36286-955 comes in 93-1/2" long stick but can be cut to size to fit your 2006 Ragen Toy Hauler.

You will need to source hardware to mount the # 36286-955 at your local hardware store.

I included a video review of the # 36286-955 for you to take a look at.

expert reply by: Samuel C

0

Answer 1

Appreciate the photos, and yes, the trim you asked about does look to be exactly what you are needing: - Even Rub Rail Trim for Enclosed Trailer - 1-1/2" Tall x 1/8" Deep - Aluminum #36284-955 This trim is 93-1/2" long, so if…

view full answer...

Answer 2

The closest we have to the measurements your mentioned is the Even Rub Rail Trim for Enclosed Trailer #36284-955 which is the 1-1/2" you need and is 93-1/2" long (7.7'). You would need to get two and cut one down to get the 10' that…

view full answer...

Answer 3

I checked with TRC and they sent me the following pictures for the Flat Rub Rail Trim for Enclosed Trailer #36286-955 that you referenced.

view full answer...

Answer 4

I do recommend upgrading the spring bars on your Equal-i-zer Weight Distribution System to the Replacement Spring Bars for Equal-i-zer Weight Distribution Systems part #EQ90-01-1099 which are rated for up to 1,000 lbs of tongue weight. The 1,000 lb…

view full answer...

Answer 5

The different size Equal-I-Zer systems have heads to match the bar sizes so the parts are not interchangeable. But not to worry, with some adjustment you can soften it up a little and not have to use a different system. You will need to lower the…

view full answer...

Answer 6

Yes, you can just replace the spring bars and head of your current system to change the weight rating. All you would need is the part #EQ90-01-1099 for a set of bars and #EQ90-02-1000 for the head that are rated lower at 1,000 lbs tongue weight.

view full answer...

Answer 7

To upgrade to a 1,400 system you would need the Replacement Spring Bars for Equal-i-zer Weight Distribution Systems - Qty 2 - 1,400 lbs TW #EQ90-01-1499 and Replacement Head for Equal-i-zer Weight Distribution Systems - 1,400 lbs TW #EQ90-02-1400 as…

view full answer...

Answer 8

Yes, a trailer that is nose up can cause big problems. A level trailer is ideal and worth working toward for safety. The good news is that you can get the trailer almost exactly level with switching ball mounts. This is where an adjustable ball mount…

view full answer...

Answer 9

At first glance, it looks like the Equal-i-zer WD system you were considering #EQ37120ET is a little stronger than what you need in a weight distribution hitch. This system may require considerable spring bar adjustment to set up correctly, and will…

view full answer...

Answer 10

Before you purchase a weight distribution you need to make sure the trailer manufacturer recommends using a system on the trailer. A lot of aluminum trailers cannot bear the stress a weight distribution system puts on the frame like steel trailers…

view full answer...

Answer 11

You would not be able to simply replace the spring bars on your Equal-i-zer #EQ37060ET weight distribution hitch. Instead you would need to get both the 1,000 lb tongue weight spring bars #EQ90-01-1099 as well as the 1,000 lb head unit…

view full answer...

Answer 12

It is possible for some spring bars to be interchanged based on their size, but that won't increase a weight distribution system's capacity without adding the appropriate head unit. The replacement spring bars that are rated for 1,200 lbs TW…

view full answer...

Availability Of 1-1/2" Wide Aluminum Trim For Trailers

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching