Upgrading Equal-i-zer Weight Distribution System Spring Bars to 10K for 7K Trailer
Question:
Hi, I have an RV with a 7200 GVW, 5250 DRY WEIGHT GVW TW of 720 lbs, with battery, 2x 20lb propane tanks, bike rack mounted on A frame How large of Equalizer Hitch should I have? Im currently using an 800 lbs, but should I have 1000 lb bars, so I have a little wiggle room? Any information would be appreciated, Thanks
asked by: Brent
Helpful Expert Reply:
I do recommend upgrading the spring bars on your Equal-i-zer Weight Distribution System to the Replacement Spring Bars for Equal-i-zer Weight Distribution Systems part # EQ90-01-1099 which are rated for up to 1,000 lbs of tongue weight. The 1,000 lb spring bars are rated for 600 lb to 1,000 lbs of tongue weight so this will be the perfect spring bar for your trailer. The spring bar weight being in the middle of the system's capacity allows for the best performance with room for error or upgrading.
Product Page this Question was Asked From
Replacement Spring Bars for Equal-i-zer Weight Distribution Systems - Qty 2 - 1,000 lbs TW
- Accessories and Parts
- Weight Distribution Hitch
- Spring Bars
- 1000 lbs TW
- Square Bar
- Equal-i-zer
- Equal-i-zer
more information >
Continue Researching
- Shop: Road Armor Shock Absorbing Equalizer Kit - Tandem Axle - Qty 2
- Shop: Lippert AP Kit - Tandem Axle Road Armor Wet Bolts and Shackles
- Shop: MORryde Suspension Upgrade Kit for Tandem Axle Trailers w Correct Track - 3-1/8" Shackle Straps
- Shop: Lippert Tandem Axle Equa-Flex AP Kit - Wet Bolts - 3-1/8" Long Shackles
- Shop: MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 3-1/8" Long Shackle Straps
- Shop: Towing Mirrors
- Q&A: Equal-I-Zer Weight Distribution is Too Stiff; Can Lighter Bars be Used in the Same Head
- Shop: Replacement Spring Bars for Equal-i-zer Weight Distribution Systems - Qty 2 - 1,000 lbs TW
- Search Results: road armor equalizer
- Q&A: Can Spring Bars of Equal-i-zer Weight Distribution System be Changed to Change Rating
- Q&A: What Spring Bars for Equal-i-zer Weight Distribution are Needed for Keystone Springdale 1750RD
- Article: How to Measure for Trailer Hitch Drop
- Q&A: What is the Width of the Equal-i-zer Replacement Spring Bars
- Q&A: Normal Wear and Tear on an Equal-i-zer Weight Distribution Head
- Shop: Replacement Head for Equal-i-zer Weight Distribution Systems - 1,000 lbs TW
- Video: Review of Equal-i-zer Pins and Thumb Clips For Weight Distribution Spring Bars - EQ95-01-9415
- Q&A: Comparing Equal-i-zer and Curt MV Weight Distribution Hitch Systems
- Video: Review of TRC Enclosed Trailer Parts - Bottom Rail Trim - 36277-955
- Video: Review of TRC Enclosed Trailer Parts - Flat Rub Rail Trim - 36286-955
- Video: Review of TRC Enclosed Trailer Parts - 36284-955
- Q&A: What Brake Replacements Do You Recommend for My Dexter 5200 Pound Axles?
- Shop: Trailer Wiring
- Shop: Vehicle Air Mattress
- Shop: Off Road Lights
- Shop: Replacement Mirrors
- Shop: Air Filter
- Shop: Vehicle Lights
- Video: Review of CURT Weight Distribution Hitch - MV 14K W.D. with Sway Control - C17063
- Search Results: equalizer
- Search Results: transmission coolers