Trailer Hitch Pin Lock Fit for a Trailer Hitch on a 2013 Toyota Land Cruiser

Question:

Will this work with a 2013 Toyota Land Cruiser?

asked by: Mark C

Expert Reply:

Our etrailer.com Hitch Receiver Lock, # e98881, was designed to work with both 2 inch x 2 inch and 2-1/2 inch x 2-1/2 inch trailer hitch receivers so it should work well with the trailer hitch on your 2013 Toyota Land Cruiser. This hitch pin lock is a universal lock that was designed to fit most trailer hitches. If you want to verify that this lock will fit your hitch, there are two important measurements that you will want to take.

First you will want to know the outside width of your receiver tube at the hitch pin hole. The inside width of this lock is 3-5/8 inches. Some vehicles have limited clearance around the receiver opening to use a hitch lock. The overall length of this lock is 6-7/8 inches. I recommend checking to make sure you will have enough room to easily insert this locking hitch pin into the hitch pin hole on your receiver without any obstruction.

expert reply by: John H