What Bearings Are Used in the Kodiak Disc Brake Kits for 2000-lbs and 3500-lbs Axles
Question:
Good morning Im looking to find brakes for a homemade crosskart buggy with 10 wheel on a hyundai elantra spindle. Could you send the schematics for the 8 trailer rotors Item # K2HR2D and Kit # K2HR35D-8 to see if I can adapt to my application. Thanks and Good Day
asked by: Bill L
Expert Reply:
I have information that you might find helpful, but we do not have a schematic drawing of these parts available. With that said, if you've got a spindle from a Hyundai Elantra on this buggy then you're most likely only going to be able use parts that also fit on a Hyundai Elantra- which trailer parts most likely will not. However, I can tell you that the Kodiak # K2HR2D uses # L44649 bearings for the inner and outer bearing, so they're designed for a straight spindle with a 1.063" diameter, so you'll want to measure the diameter of the spindle to determine if these would work. The Kodiak # K2HR35D-8 uses an #L68149 inner bearing (1.378" inner diameter) and # L44649 outer bearing (1.063" inner diameter).
Both of these brake kits require a hydraulic actuator that provides at least 1500psi of pressure.
If you find that one of these will work with your spindle, you'll just want to make sure your brake system provides sufficient pressure to actuate these brakes.
Products Referenced in This Question
Kodiak Disc Brake Kit - 8" Rotor/Hub - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- LH
- RH
- 3500 lbs
- Brake Assembly
- 5 on 4-1/2
- Hub and Rotor Assembly
- Kodiak
more information >
Product Page this Question was Asked From
Kodiak Disc Brake Kit - 8" Rotor/Hub - 5 on 4-1/2 - Dacromet - 2,000 lbs
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- LH
- RH
- 2000 lbs
- Brake Assembly
- 5 on 4-1/2
- Hub and Rotor Assembly
- Kodiak
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Bearing Kit, L44649 Inner/Outer Bearings, 10-9 Seal
- Shop: BTR E-Z Lube Spindle w/ Brake Flange for 2,500-lb Trailer Axles - 1-3/4" Diameter
- Shop: Kodiak Disc Brake Kit - 8" Rotor/Hub - 5 on 4-1/2 - Dacromet - 2,000 lbs
- Search Results: l44649
- Q&A: Disc Brake Kit Recommendation for Spindle that Measures 1 inch in Diameter
- Shop: etrailer Electric Trailer Brakes - 7" - Left/Right Hand Assemblies - 2,000 lbs
- Shop: 2" Lubed Dust Cap & Rubber Plug - 1.99" x 1.40" x 1.18" - Qty 1
- Shop: Replacement Mounting Bracket for Kodiak Disc Brake Caliper - Dacromet - 3,500 lbs
- Shop: Loadstar ST225/75D15 Bias Trailer Tire with 15" White Wheel - 5 on 4-1/2 - Load Range D
- Q&A: Replacement Hub and Spindle for 2014 Ranger Trailer
- Article: Trailer Tire Sizing
- Q&A: What is the Best Grease for Trailer Bearings
- Shop: Trailer Hitch
- Search Results: 25580
- Search Results: lug nut
- Shop: Trailer Wiring
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Most Popular Wheel Bearings
- Video: etrailer Trailer Idler Hub Assembly Review and Installation
- Search Results: l68149
- Shop: Brake Controller
- Search Results: lug nuts
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Shop: Gooseneck Hitch
- Article: Trailer Wiring Diagrams
- Search Results: trailer tires and wheels
- Video: etrailer Trailer Idler Hub Assembly Installation
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Shop: Suspension Enhancement
- Shop: Fifth Wheel Hitch
on Accessories and Parts
