Available Guide-On Heights for Boat Trailer

Question

Question:

Does part #Ce27636 come in sizes less then 70 inches?

asked by: Philip N

1

Helpful Expert Reply:

They sure do. They're available in several different lengths shorter than the 75 inch high # CE27636 guide-ons that you'd looked at.

Here are the un-lighted versions:

• 65 inches tall, part # CE27637
• 60 inches tall, part # CE27640
• 40 inches tall, part # CE27620

If you'd prefer lighted guide-ons, those are available as well in certain heights:

• 60 inches tall, part # CE27760
• 40 inches tall, part # CE27740

expert reply by: Mike L

1

Answer 1

The galvanized tubing used on the CE Smith #CE27637 guide ons is 1-1/2 by 1-1/2 inches. I've linked to a product demonstration video that you might find helpful.

view full answer...

Answer 2

The guide 65” poles/markers on the CE Smith #CE27637 Guide Ons are only meant as markers to show you where the trailer is. While they can endure some pressure in relation to a straight on approach, off angle pressure which can occur with water…

view full answer...

Answer 3

The CE Smith Post-Style Guide-Ons for Boat Trailers - 75" Tall #CE27636 has base bars that are 23 inches long to the outside of the bend. The bars adjusts out to 19" from trailer. I've attached a photo to help.

view full answer...

Answer 4

I spoke with my contact at CE Smith, and they said the Bolster and Swivel Bracket Assembly for Boat Trailers, part #CE10000G, do not bear the weight of the boat. The U-bolt that attaches the brackets to the trailer frame support the weight of the…

view full answer...

Answer 5

For your 28 foot Bayliner trailer, I recommend the CE Smith Bunk-Style Guide-Ons for Boat Trailers - 60" Long - 1 Pair #CE27600. These are 2x4 bunk boards, but you could use 2x6 if you prefer. We don't carry that size board, but we do carry…

view full answer...

Answer 6

When installing guide-ons on your boat trailer, like part #CE27636, you want to make sure that they extend high enough that they are easily visible when you are loading your boat. If you feel comfortable loading your boat with the guide-ons being…

view full answer...

Answer 7

The best way to determine the height needed is to measure from the top of your trailer frame to the top of the sides of your boat. If the 40" Tall Guide-Ons #CE27626 sit right at or slightly above the sides of your boat then the shorter will…

view full answer...

Answer 8

I looked up pictures of Baja Outlaw 25 boats on trailers and since the boats are taller the size of guide ons were taller options like the CE Smith part #CE27636 which is 75 inches tall.

view full answer...

Answer 9

Pontoon boats normally use guide-ons that mount in the center of the trailer, and even with the three pontoons on your aptly named Aqua Patio Tritoon having lifting strakes, the CE Smith Post-Style Guide-Ons for Pontoon Boat Trailers #CE27670 should…

view full answer...

Answer 10

The metal uprights in the CE Smith Guide-on set #CE27636 are 39 inches tall by 23 inches long. So the shorter portion that you mentioned would be 23 inches.

view full answer...

Available Guide-On Heights for Boat Trailer

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching