How Long Is The Base Bar Of The CE Smith Post Guide-Ons 75 Inches Tall?

Question

Question:

Product # CE27636, 75 tall post guide on. How long is the base barinch that slides and clamps into mounting bracket?

asked by: Ralph

0

Expert Reply:

The CE Smith Post-Style Guide-Ons for Boat Trailers - 75" Tall # CE27636 has base bars that are 23 inches long to the outside of the bend. The bars adjusts out to 19" from trailer. I've attached a photo to help.

expert reply by: Jason S

0

click to enlarge

Answer 1

In regards to the CE Smith Post-Style Guide-Ons for Boat Trailers part #CE27636, if you need to extend the uprights more than 19" from outside of the frame you'd have to replace the horizontal bar stock with a longer option. It's…

view full answer...

Answer 2

You are correct in stating that the guideposts on the CE Smith Post-Style Guide-Ons for Boat Trailers - 60" Tall #CE27640 will only adjust out to 13 inches from your trailer. The mounting brackets used will not be able to provide any additional…

view full answer...

Answer 3

There are a few factors that go into selecting the correct height of boat guide-on. It varies by setup but if you don't know what height you need you can simply go with an option longer than you'll need and then trim as you see fit. The CE…

view full answer...

Answer 4

For the 75" tall CE Smith Post-Style Guide-Ons for Boat Trailers #CE27636 to fit your 2" x 6" boxed frame you'll need to visit your local hardware store for U-Bolts that are 7/16" diameter and 6-1/2" long while using the…

view full answer...

Answer 5

The metal tubes inside the CE Smith Post-Style Guide-Ons for Boat Trailers - 75" Tall #CE27636 are the uprights. These uprights, which are available at part #CE27605PG, measure 39" tall.

view full answer...

Answer 6

The CE Smith Post-Style Guide-Ons for Boat Trailers part #CE27636 which install outside of the frame can be used on a pontoon boat trailer but you don't see this much because the floats are really large and usually stick out further. Therefore,…

view full answer...

Answer 7

The upright steel portion of the guideposts on the CE Smith Post-Style Guide-Ons for Boat Trailers #CE27636 is only around 39 inches. The remaining height consists of just the outer layer PVC pipe that slides over the steel posts. With this in mind,…

view full answer...

Answer 8

The metal uprights in the CE Smith Guide-on set #CE27636 are 39 inches tall by 23 inches long. So the shorter portion that you mentioned would be 23 inches.

view full answer...

Answer 9

When installing guide-ons on your boat trailer, like part #CE27636, you want to make sure that they extend high enough that they are easily visible when you are loading your boat. If you feel comfortable loading your boat with the guide-ons being…

view full answer...

Answer 10

It looks like you might be looking for the CE Smith Post-Style Guide-Ons for Boat Trailers - 60" Long - I-Beam Clamps - White - Qty 2 #CE27648, which are a 60" post style guide on that are white in color.

view full answer...

Answer 11

It sounds like you are trying to bring the boat down closer to the trailer frame. I have personally not seen many setups that involve using keel rollers like the CE Smith Deep V Keel Roller Assembly part #CE10455G with a pontoon boat but if you have…

view full answer...

Answer 12

Many of the boat trailer guide-on posts we offer are parts of complete kits that include the PVC pipes, guide-on posts and installation hardware, as shown on the linked page. But we also offer two replacement uprights for CE Smith bunk-style…

view full answer...