Replacement Latch Pocket Cover 35830102 For Extang Solid Fold 2.0 Tonneau Cover

Question

Question:

I need the small rectangular piece that snaps in to hold the tail clamp assembly in place so it wont slide off and out. The inscribed number is 35830102. The clamp inscribed number is 35443700.

asked by: Michael

0

Expert Reply:

Thanks for that info, and I was able to find that 35830102 is the part number for the Latch Pocket Cover for the Extang Solid Fold 2.0 tonneau cover. We do have that part available, which is the following:

- Replacement Latch Pocket Cover for Extang Solid Fold 2.0 # EX69GR

expert reply by: Kyle S

0

Answer 1

While it can be difficult to get started on these the two panels will slide into the Replacement Tail Hinge for Extang Solid Fold 2.0 Hard Tonneau Cover part #EX83475-64. Of course there is the seal to get out of the way so you can begin sliding…

view full answer...

Answer 2

The Extang Replacement Tail Hinge #EX83475-64 installs on the panels of their Solid Fold covers like 83475 by those panels' rounded edge rail sliding into the round channels on the hinge. The photo I linked shows the replacement hinge and…

view full answer...

Answer 3

The Extang Replacement Tail Hinge #EX83475-64 installs on the panels of their Solid Fold covers like 83475 by those panels' rounded edge rail sliding into the round channels on the hinge. The photo I linked shows the replacement hinge and…

view full answer...

Answer 4

I'm glad to hear that you received the Rear Tailgate Clamp, #EX31003005, for your Extang Trifecta 2.0 tonneau cover. I called Extang and discovered that they don't have any videos for replacing the rear clamp. But, they were kind enough to…

view full answer...

Answer 5

Based on my research, the Trailer Hub and Drum Assembly - 8,000-lb E-Z Lube Axles #AKHD-865-8-EZ-K will be a replacement for the 90865 Rockwell hub and drum. Both of these hub and drum assemblies are 12-1/4" diameter, have an 8,000 lb capacity,…

view full answer...

Answer 6

The correct replacement for a Demco Master Cylinder 05680-C is the Replacement Master Cylinder part #5650. I spoke with Demco to confirm this for you.

view full answer...

Answer 7

The part you referenced 127194TB is a double-lip seal with an inner diameter of 1.274-inches and an outer diameter of 1.983-inches. The available seal nearest to those dimensions that we offer is part #RG06-010, which is a double-lip seal sold as a…

view full answer...

Answer 8

A TCM double-lip grease seal number 127194 has an inner diameter of 1.274-inches and an outer diameter of 1.983-inches according to my research. The available grease seal nearest to those dimensions that we offer is part #RG06-010, which is a…

view full answer...

Answer 9

The correct replacement master cylinder kit we have for your Demco setup is the part #DM5918 which comes with the lock out replacement.

view full answer...

Answer 10

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 11

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 12

I was able to find the OEM part number for the Chevy spare tire hoist but I was unable to find a weight capacity rating on it. The owner's manual for the 2015 Chevy Silverado 1500 and the original hoist can handle the weight of a full sized spare…

view full answer...

Replacement Latch Pocket Cover 35830102 For Extang Solid Fold 2.0 Tonneau Cover

Product Page this Question was Asked From

Continue Researching