Logos on the BAK MX4 for the 2021 Ram 3500 Short Bed

Question

Question:

Looking at BAK MX4 cover for ram 3500 mega cab. In one of the videos the cover shown had a white etrailer logo BAK logo. That is not shown on the product pictures. I just want to confirm the cover does not have extra logos on it.

asked by: Adam

0

Expert Reply:

It looks like you are referencing the BAK MX4 for the 2021 Ram 3500 6-1/2 Foot Bed - without RamBox, part # BAK48203.

All of the logos on this are the ones provided by the manufacturer, BAK.

expert reply by: Kef G

0

Answer 1

We don't carry Pullrite hitches, but I was able to find several pictures of them online in the bed of trucks and the height of the hitch and handle easily was lower than the top of the bedrails so a tonneau could easily fit over the bed. For a…

view full answer...

Answer 2

I have a couple of different options for your 2017 Ram 3500 Crew Cab. Your truck has a bed height of just over 20 inches so I will recommend some 5th wheel hitches that are adjustable to under 3 inches of that 20 inch mark that you're looking…

view full answer...

Answer 3

The BAKFlip MX4 Hard Tonneau Cover #BAK48203 will fit your 2005 Dodge Ram 3500 pickup with the 6-1/2' short bed. I reached out to BAK for the measurement to use the cover with your 5th wheel. They informed me from the back of your cab the edge of…

view full answer...

Answer 4

The BAKFlip MX4 Hard Tonneau Cover #BAK48203RB for your 2020 Ram 2500 with the 6-1/2' bed will have 4 sections. The image from BAKFlip is a generic picture that is on a Silverado. Both the customer image that you found as well as our installation…

view full answer...

Answer 5

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 11

As long as the RBW Lil' Rocker mounts to industry standard base rails you'll need the Curt Adapter Rails #C29BR that fit in the OEM puck system on your 2019 Ram 2500 and give you a standard base rail connection. I'm attaching a photo…

view full answer...

Answer 12

Most standard pin boxes will not make a 90 degree turn in anything less than an 8 foot truck bed, but that is due to being too close to the cab - not the rails. You mentioned you wanted to replace the Rota-Flex with the Gen-Y hitch. Your old pin box…

view full answer...