Will the Curt Front Hitch C31008 Fit on a 2019 Ford F-350

Question

Question:

Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2 - C31008 . Will the above front hitch bolt on to my 2019 F-350 4x4 without modification?

asked by: Capt B

0

Expert Reply:

I have a solution for you, but the Curt # C31008 is only designed to fit on 2008-2010 Ford Super Duty trucks. For a 2019 Ford F-350 you'll need the Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2" # C31078, which is the confirmed custom fit front hitch for this vehicle. Installation of a front hitch on the 2019 F-350 may require trimming of front air dam and/or fascia for installation, but this is the case for all of the front hitches available for this model.

I've added a photo of this hitch installed for you to see what it's going to look like, as well.

expert reply by: Erik B

0

Curt fr
(click to enlarge)

Answer 1

We do offer a front hitch that will be a good fit for your 2021 F-350 Super Crew 8' bed Dually 7.3 with a gas engine. The EcoHitch #306-x7904 is not going to fit a dually truck. Instead, we recommend the EcoHitch #EH83GR, which is basically made…

view full answer...

Answer 2

The crosstube on the Draw-Tite #65076 and Curt #C31078 front hitch receivers for your 2018 Ford F-250 Super Duty are at different locations than the mounting brackets connected to them. To really determine where the hitch pin hole will be we need to…

view full answer...

Answer 3

I attached pictures that show how the Curt front hitch #C31078 and the Draw Tite #65076 looks when installed and you can tell that the Draw Tite sits up a bit higher since it comes through relative to the curve in the air dam.

view full answer...

Answer 4

It looks like the hitch pin hole on the Curt Front Mount Trailer Hitch Receiver #C31078 will stick behind and/or below the fascia while the Draw-Tite Front Mount Trailer Hitch Receiver #65076 will stick out far enough to easily reach the hitch pin…

view full answer...

Answer 5

If you are carrying more than 500 lbs on the front of your F-350 then the only front mount hitch that will work is the EcoHitch item #306-X7904. This hitch has a 1,000 lbs vertical load limit (tongue weight). The Curt item #C31078 only has a 500 lbs…

view full answer...

Answer 6

Yes, both the Draw-Tite Front Mount Hitch part #65076 and the Curt hitch part #C31078 fit all models of the 2019 Ford F-250 Super Duty. They will not interfere with the front axle at all. I have attached photos showing how they install on the Ford…

view full answer...

Answer 7

The Hellwig Adjustable Big Wig Rear Anti-Sway Bar #HE94FR is only going to leave a few inches between it and the spare tire, as you can see in the attached picture. Depending on how far forward you have the tire it could potentially interfere with…

view full answer...

Answer 8

At this time we have not installed the EcoHitch Hidden Front Mount Trailer Hitch Receiver #EH83GR on a 2020 Ford F-350 dually to get a height measurement in our shop. Based on an image we received as seen below it does appear the top of the receiver…

view full answer...

Answer 9

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

If you have the Ford 3" hitch then you can definitely add it but, yes it would change the weight capacity. The TorkLift Cannon Hitch Extension item #TLE1636 only has a 3,600 lbs towing capacity and a 360 lbs maximum tongue weight. If used with a…

view full answer...

Answer 12

Good morning, Kyle. The Furrion Vision S Cameras cannot be made to send signal to a Kenwood aftermarket rear camera display. The Furrion cameras are only compatible with the Furrion brand monitors. So, if you are in need of a new camera, I suggest…

view full answer...

Will the Curt Front Hitch C31008 Fit on a 2019 Ford F-350

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching